Abstract:The Fe-based MOF MIL-100(Fe) has been synthetized and fully characterized by XRD, N2-adsorption-desorption, ATR-FTIR, elemental analysis, WDXRF, XPS, DR-UV-vis, TGA-DTA, and pHPZC. MIL-100(Fe) presented rather good crystallinity and porosity (SBET = 1468 m2 g−1, total pore volume 0.716 cm3 g−1), though some unreacted linker (trimesic acid, TMA) was detected trapped in the structure. Purified MIL-100(Fe), free of unreacted trapped TMA, could be further obtained by some polishing treatments involving ozone, radiation and hydrogen peroxide at different conditions. The stability of the synthesized MIL-100(Fe) was studied in long-term experiments (15 days) at different pH (4–10) in non-buffered and phosphate-buffered ultrapure water, and in secondary effluent samples taken from a municipal wastewater treatment plant. Also, MOF stability was studied under different oxidizing environments through five-cycle experiments reusing the solid. Oxidizing conditions were produced by simulated solar radiation (550 W m−2, 300–800 nm), ozone (doses 0.25–2.0 g O3/g MOF) and/or hydrogen peroxide (doses 0.25–2.5 g H2O2/g MOF). The material showed low stability in the presence of phosphates and, also, at high oxidant doses plus radiation with moderate to high MOF degradation during the treatments. Purified MIL-100(Fe) samples were used as catalysts for the removal of four contaminants of emerging concern (metoprolol, clofibric acid, N,N-diethyl-m-toluamide and ibuprofen) by means of heterogeneous photocatalysis, Fenton-like, photo-Fenton-like, catalytic ozonation and photocatalytic ozonation processes. High catalytic activity in photo-Fenton-like and moderate activity in photocatalytic ozonation processes were attained but still the stability of the materials was questionable because of TMA and iron leaching into the reaction medium. Therefore, although TMA and the organic contaminants could be effectively removed by the advanced oxidation processes studied, bare MIL-100(Fe) is not recommended for water treatment.

Efficient removal of microcystin-LR from contaminated water using water-stable MIL-100(Fe) synthesized under HF-free conditions

Facile and economical synthesis of metal–organic framework MIL-100(Al) gels for high efficiency removal of microcystin-LR

Micron-confined Microcapturer-Triggered Fenton As Efficient and Environmentally-Friendly Method for Simultaneously Capturing Bloom-Forming Cyanobacteria, Inhibiting Cell-Regrowth and Degrading Microcystins

Removal of Microcystin-LR in Lake Water Sample by Hydrophilic Mesoporous Silica Composites under High-Throughput MALDI-TOF MS Detection Platform

Oxidation and Biotoxicity Assessment of Microcystin-Lr Using Different AOPs Based on UV, O-3 and H2O2

Degradation and Detoxification of Microcystin-Lr in Drinking Water by Sequential Use of UV and Ozone

Synthesis of Magnetic Core–shell Fe3O4@PDA@Cu-MOFs Composites for Enrichment of Microcystin-Lr by MALDI-TOF MS Analysis

The Removal Mechanisms of Microcystin-Lr Through Electrolysis Biofilters

Photodegradation of MC-LR using a novel Au-decorated Ni metal-organic framework (Au/Ni-MOF)

Removal of Microcystis aeruginosa and microcystin-LR using chitosan (CTS)-modified cellulose fibers and ferric chloride

Study on the removal and degradation mechanism of microcystin-LR by the UV/Fenton system

Coupling physiochemical adsorption with biodegradation for enhanced removal of microcystin-LR in water

Removal of Cyanobacterial Microcystin-Lr by Ferrate Oxidation–coagulation

Removal of emerging contaminants from water by using Fe-MOF composite as a sorbent

MIL series-based MOFs as effective adsorbents for removing hazardous organic pollutants from water

Microcystin-LR Degradation Utilizing a Novel Effective Indigenous Bacterial Community YFMCD1 from Lake Taihu

Kinetic and thermodynamic studies of Methylene Blue adsorption process from aqueous solutions by MIL-101(Cr)@ZnO nanostructure

Critical aspects of the stability and catalytic activity of MIL-100(Fe) in different advanced oxidation processes

Removal of Microcystin-LR from spiked natural and synthetic waters by anion exchange

In Situ Synthesis of MIL-100(Fe) at the Surface of Fe3O4@AC as Highly Efficient Dye Adsorbing Nanocomposite

High-efficient and Sustainable Biodegradation of Microcystin-Lr Using Sphingopyxis Sp. YF1 Immobilized Fe3O4@chitosan