Removal of Microcystis aeruginosa and microcystin-LR using chitosan (CTS)-modified cellulose fibers and ferric chloride

Mingmeng Liu,Junjie Zhang,Lingling Wang,Haiyang Zhang,Wen Zhang,Xuezhi Zhang

DOI: https://doi.org/10.1016/j.seppur.2022.122889

IF: 8.6

2022-12-25

Separation and Purification Technology

Abstract:The occurrences of harmful algae blooms (HABs) and cyanotoxins such as microcystin-LR (MC-LR) are increasing in water reservoirs and compromise drinking water security. In this study, chitosan (CTS) modified cellulose fibers (CF) were developed as a green adsorbent for the simultaneous removal of a model algae cell, Microcystis aeruginosa , and MC-LR. The results showed that the CTS modification could render amine groups (−NH 2 ) on CF and increased the adsorption affinity toward algae. In the absence of algogenic organic matter (AOM), the algae removal reached 100% at a dosage of 26.7 g-NH 2 -CF/g-algae (dry weight); however, at the same CF dosage, the presence of AOM (8.13 mg‐carbon·L −1 ) strongly reduced the adsorption by NH 2 -CF and removal rate of algae cells reached only 3.2 ± 3.0%. When adding FeCl 3 or Fe 3+ at a concentration of 11.2 mg-Fe·L −1 , the inhibitory effect of AOM was dramatically reduced as indicated by the improved algae removal up to 95% at an NH 2 -CF dosage of 20.45 g·g −1 , because of the reduced energy barrier between NH 2 -CF and cells. Moreover, when the Fe 3+ concentration was increased to 16.8 mg·L −1 , 79% of MC-LR was simultaneously removed. Thus, combining Fe 3+ with NH 2 -CF is proven effective to enhance the adsorption and removal of Microcystis aeruginosa and MC-LR and achieve a sustainable mitigation of HABs.

engineering, chemical