Abstract:Stellite 6 is widely used in high-temperature environments; the evolution of its microstructure and mechanical properties during high-temperature exposure is essential for long-term service. In our work, Stellite 6 claddings were manufactured by plasma arc cladding, followed by a long-term isothermal aging process at 700 °C to imitate high-temperature service. The microstructures were characterized using a scanning electron microscope (SEM) equipped with energy dispersive spectroscopy (EDS) and electron backscattered diffraction (EBSD). It was observed that the microstructure of the as-clad coating mainly consisted of γ-Co (cobalt) and carbide eutectics. During isothermal aging at 700 °C, the γ-Co was found to transform to ε-Co. Moreover, fine M23C6 particles were observed to precipitate along the stacking faults of ε-Co. The eutectic carbides also experienced remarkable change; M23C6 grew along the edge of the M7C3 block, indicating the decomposition of M7C3, which might result in the dispersal of eutectic after aging for 500 hours. The microhardness and wear tests indicated that the aging process was beneficial in enhancing the mechanical properties both at room temperature (RT) and 700 °C. According to the morphology of the worn surface, the enhancement of wear performance mainly resulted from the restriction effect of dispersal eutectic carbides and timely removal of oxide. It was also found that the wear mode gradually transformed from adhesive wear to abrasive wear with aging time, which mainly resulted from the increase in the amount of precipitations cut from the matrix, and they acted as the friction pair during the wear test.

Microstructure, hardness, and wear resistance at room and high temperature of Stellite-6/WC-6Co coatings deposited by laser cladding process

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

High-temperature tribological performance of functionally graded Stellite 6/WC metal matrix composite coatings manufactured by laser-directed energy deposition

Effect of Laser Cladding Stellite 6-Cr3C2-WS2 Self-Lubricating Composite Coating on Wear Resistance and Microstructure of H13

Microstructure, hardness and slurry erosion-wear behaviors of high-speed laser cladding Stellite 6 coatings prepared by the inside-beam powder feeding method

Microstructure and Erosion Wear of In Situ TiC-Reinforced Co-Cr-W-C (Stellite 6) Laser-Cladded Coatings

Tribological Performance and Wear Mechanism of Laser Cladded NiCrAl-WC Coatings at High-Temperature

The Influence of Ti and Ni on the Microstructure, Wear Resistance, and Thermal Fatigue Performance of Laser Cladded Stellite 6 Coatings

High-temperature wear behavior of HVOF sprayed, laser glazed, and laser cladded Stellite 6 coatings on stainless steel substrate

Optimization and high-temperature wear characterization of Stellite alloy claddings developed using TIG welding on 56NiCrMoV7 die steel

Effect of Y2O3 Content on Microstructure and Wear Resistance of Laser Cladding Layer of Stellite-6 Alloy

Study Of Wear And Corrosion Resistances Of Ni60-Wc + Tic Composite Coating

Microstructure and wear resistance of in-situ TiC reinforced Stellite 6 coating using PTA cladding

Effects of Isothermal Aging Process on Microstructure and Mechanical Properties of Stellite 6 Coatings by Plasma Arc Cladding

Study on fabrication of multi-phase reinforcement coatings on Ti6Al4V by laser cladding for enhanced tribological performance

Development and Characterization of Laser Clad High Temperature Self-Lubricating Wear Resistant Composite Coatings on Ti–6Al–4V Alloy

Microstructure and Wear Resistance of Laser Cladding nano TiC/micro TiB2/C-276 Composite Coatings on 316L Stainless Steel

Microstructure and corrosion-wear behaviors for laser cladding repaired martensitic stainless steels using Co-based and Ni-based powders

Microstructure and High-Temperature Tribological Properties of Laser-Cladded WC10Co4Cr–xTi2AlC Coatings

Friction and wear performance of laser clad Mo modified Stellite 12 matrix coatings at elevated temperature

Microstructure and Wear Properties of a Novel Mixed Stellite Coating Deposited on H13 Steel Using Laser Cladding Technology