Abstract:To obtain a comprehensive understanding of the difference between deep and shallow rocks, and the damage evolution laws of a rock mass at different depths, a case study was conducted on the Pingdingshan Coal Mine. Mechanical behavior and real-time acoustic emission (AE) testing were carried out to investigate the spatiotemporal evolution of the damage in coal at different depths under triaxial compression conditions. Coal samples from different depths (300, 600, 700, 850, and 1050 m) of the same coal seam were collected, and the geostresses measured at each depth were considered in the two-factor simulation method. The AE characteristics and the spatiotemporal evolution of the coal damage at different depths were also obtained. The testing results show that under the influence of the confining pressure caused by increased geostress, the AE activity and the average scale of the cracks in the coal decreased with increasing depth. The deeper coal developed more small cracks and more plastic strain. With increasing depth, the fractal dimension reduction mode of the spatial distribution of AE under continuous loading changed from dropping suddenly from a higher dimension level (2.97) at a higher stress level (70%) to dropping slowly from a lower dimension level (2.63) at a lower stress level (20%). The generation of AE events was more uniform in the time dimension, while the spatial distribution became more uneven and clustered. With continuous loading, the number of AE events and damage in the shallow coal increased, and the dimension of the spatial distribution of AE decreased sharply during the failure stage before the peak stress was reached. With increasing depth, the damage initiation of coal shifted to an earlier time, while the damage evolution process was more stable and orderly, and ended with a higher damage degree. The sudden damage increase of deep coal was not obvious when approaching to failure. The shallow coal was more brittle and prone to sudden failure with the centralized release of AE energy after reaching the peak stress. However, the deeper coal exhibited a more plastic behavior and the plastic deformation became more obvious during the loading process with the gradual development of damage. These research results deepen the understanding of rock mechanics at different depths, promote the study of the difference in the damage laws of deep and shallow rock masses, and provide a meaningful reference for microseismic monitoring and disaster prevention in deep rock engineering.

Mechanical characteristics and crack evolution in specimens with double over-excavated cavities: experimental and numerical investigations

Crack Propagation and AE/EMR Response Characteristics of Pre-Holed Coal Specimens under Uniaxial Compression

Cracking Behavior and Acoustic Emission Characteristics of Heterogeneous Granite with Double Pre-Existing Filled Flaws and a Circular Hole under Uniaxial Compression: Insights from Grain-Based Discrete Element Method Modeling

Study on Mechanical Characteristics and Failure Modes of Coal–Mudstone Combined Body with Prefabricated Crack

Mechanical and crack evolution characteristics of coal–rock under different fracture-hole conditions: a numerical study based on particle flow code

Experimental and numerical investigation on the mechanical characteristics and failure mechanism of cracked coal & rock-like combined sample under uniaxial compression

Experimental Investigation on Mechanical and Damage Properties of Single Fractured Coal Subjected to Water Pressure and Triaxial Compression

Experimental investigation of the fracture and damage evolution characteristics of flawed coal based on electric potential and acoustic emission parameter analyses

Investigation of the crack evolution characteristics of coal and rock bodies around boreholes during progressive damage based on stress threshold values

Progressive failure characteristics of coal under uniaxial compression: A comprehensive application of micro-ct and digital volume correlation

Mechanical properties and energy evolutions of burst-prone coal samples with holes and fillings

Discrete element study on mesomechanical behavior of crack propagation in coal samples with two prefabricated fissures under biaxial compression

Study on overburden failure characteristics and displacement rule under the influence of deep faults

Experimental study on the interrelation of multiple mechanical parameters in overburden rock caving process during coal mining in longwall panel

Mechanical Properties and Energy Evolution Characteristics of Borehole-Containing Specimens under Disturbances of Cyclic Incremental Stress with Different Lower Limits

Experimental Study on Evolution of Fracture Network and Permeability Characteristics of Bituminous Coal Under Repeated Mining Effect

Dynamic mechanical response and crack evolution law of raw coal loaded by dynamic-static coupling under three-dimensional constraints

Study on the Effect of Bedding Plane and Loading Style on Fracture Process Zone in Coal

Cracking Behavior and Stress Field Evolution in Coal Specimens Containing Bedding under Uniaxial Compression

Study on the mesomechanical behavior and damage process of coal samples with hole defects under eccentric loading

Acoustic Emission Characteristics and Damage Evolution of Coal at Different Depths Under Triaxial Compression