Abstract:Acoustic emission (AE) and particle flow code (PFC 3D ) are utilized to characterize microcracking nature in mode-I fracture of coal with strong bursting liability. The microcracks are represented by AE moment tensor (MT), which corresponds to displacement discontinuities involving opening/closing and sliding motions. The microcracking source parameters, including shear/tensile type, volume, orientation, motion, and magnitude, are calculated by minimizing the errors between the analytical and measured displacements, with an imposed constraint. Then, the detailed fracture processes, including microcracking source mechanisms and energy dissipation during coal tensile failure, are analyzed using both experimental and numerical approaches. The results show that the time-varying of crack mode angle and decomposed crack volume suggest a mixed-mode mechanisms locally with both normal and tangential displacements for microcracks. However, the orientations of microcracks with bigger magnitude are almost parallel to the direction of the crack propagation path, and their movement directions are mainly along the direction of the maximum principal stress, which is compatible with the expected fracture mechanism of mode-I opening globally. The dissipated energy and crack opening displacement obtained from AE inversion are approximately consistent with results calculated from energy release rate G and opening displacement measured using DIC, respectively. A new AE MT simulation method, based on particle motion, is developed using PFC 3D to verify the reliability of the above-mentioned microcracking characterization results. The mechanical properties as well as AE responses (including AE rate, magnitude distribution, spatial location, and MT) from PFC 3D numerical simulation are in good agreement with the experimental results, which reinforces the reliability the microcracking characterization results from AE inversion and simulation. Due to the tortuous crack propagation path and the inhomogeneity between grains, the maximum principal stress and resultant displacement coexists both on the normal and tangential of the inclined crack surface. Under the combined action of tensile and shear stress, the normal and tangential motion displacement components along the crack plane are generated, respectively, resulting in mixed-mode microcrack. This research provides a new approach for characterizing the microcracks in loaded rock/coal, which can deepen the understanding of meso-process and mechanism during rock/coal fracture.

Crack Propagation and AE/EMR Response Characteristics of Pre-Holed Coal Specimens under Uniaxial Compression

Acoustic Emission Characteristics of Coal Failure Under Triaxial Loading and Unloading Disturbance

Failure characteristics and mechanism of coal under the coupling between different confining pressures and disturbance loading

Energy Evolution and Damage Deformation Behavior of Cemented Broken Coal Specimen under Triaxial Compression Condition

Mechanical characteristics and crack evolution in specimens with double over-excavated cavities: experimental and numerical investigations

Acoustic Emission Characteristics and Damage Evolution of Coal at Different Depths Under Triaxial Compression

Crack Damage Propagation and Morphology Distribution of Hydraulic Electric Pulse Fractured Coal

Investigation of the acoustic emission and fractal characteristics of coal with varying water contents during uniaxial compression failure

Experimental Investigation on Mechanical and Damage Properties of Single Fractured Coal Subjected to Water Pressure and Triaxial Compression

Experimental investigation of the fracture and damage evolution characteristics of flawed coal based on electric potential and acoustic emission parameter analyses

Investigation of the crack evolution characteristics of coal and rock bodies around boreholes during progressive damage based on stress threshold values

Discrete element study on mesomechanical behavior of crack propagation in coal samples with two prefabricated fissures under biaxial compression

Experimental Investigation on Mechanical and Acoustic Emission Characteristics of Gassy Coal under Different Stress Paths

Anisotropy of crack initiation strength and damage strength of coal reservoirs

Dynamic mechanical response and crack evolution law of raw coal loaded by dynamic-static coupling under three-dimensional constraints

Precursor Signal Identification and Acoustic Emission Characteristics of Coal Fracture Process Subjected to Uniaxial Loading

Changes in Frequency of Electromagnetic Radiation from Loaded Coal Rock

Microcracking Characterization in Tensile Failure of Hard Coal: An Experimental and Numerical Approach

Characterization of Tensile Crack Propagation and Energy Evolution during the Failure of Coal–Rock Samples Containing Holes

Progressive failure characteristics of coal under uniaxial compression: A comprehensive application of micro-ct and digital volume correlation