Abstract:Evaluating the physical mechanisms that link hydraulic fracturing (HF) operations to induced earthquakes and the anticipated form of the resulting events is significant in informing subsurface fluid injection operations. Current understanding supports the overriding role of the effective stress magnitude in triggering earthquakes, while the impact of change rate of effective stress has not been systematically addressed. In this work, a modified critical stiffness was brought up to investigate the likelihood, impact, and mitigation of induced seismicity during and after hydraulic fracturing by developing a poroelastic model based on rate-and-state frictional law and linear stability analysis. In the new criterion, the change rate of effective stress was considered a key variable to explore the evolution of this criterion and hence the likelihood of instability slip of fault. A coupled fluid flow–deformation model was used to represent the entire hydraulic fracturing process in COMSOL Multiphysics. The possibility of triggering an earthquake throughout the entire hydraulic fracturing process, from fracturing to cessation, was investigated considering different fault locations, orientations, and positions along the fault. The competition between the effects of the magnitude and change rate of effective stress was notable at each fracturing stage. The effective stress magnitude is a significant controlling factor during fracturing events, with the change rate dominating when fracturing is suddenly started or stopped. Instability dominates when the magnitude of the effective stress increases (constant injection at each fracturing stage) and the change rate of effective stress decreases (the injection process is suddenly stopped). Fracturing with a high injection rate, a fault adjacent to the hydraulic fracturing location and the position of the junction between the reservoir and fault are important to reduce the Coulomb failure stress (CFS) and enhance the critical stiffness as the significant disturbance of stresses at these positions in the coupled process. Therefore, notable attention should be given to the injection rate during fracturing, fault position, and position along faults as important considerations to help reduce the potential for induced seismicity. Our model was verified and confirmed using the case of the Longmaxi Formation in the Sichuan Basin, China, in which the reported microseismic data were correlated with high critical stiffness values. This work supplies new thoughts of the seismic risk associated with HF engineering.

Flow-geomechanics coupling constrains fault geometry in fluid-induced earthquakes

Including Vertical Fault Structures in Layered Groundwater Flow Models

Hydro-mechanical earthquake cycles in a poro-visco-elasto-plastic fluid-bearing fault structure

Coupling 3D geodynamics and dynamic earthquake rupture: fault geometry, rheology and stresses across timescales

Coupled Boundary Element and Finite Volume Methods for Modeling Fluid-Induced Seismicity in Fault Networks within Low-Permeability Rocks

Two sides of a fault: Grain-scale analysis of pore pressure control on fault slip

Fault Valving and Pore Pressure Evolution in Simulations of Earthquake Sequences and Aseismic Slip

Fluid-driven aseismic fault slip with permeability enhancement and dilatancy

Fault gouge failure induced by fluid injection: Hysteresis, delay and shear-strengthening

Implications for fault reactivation and seismicity induced by hydraulic fracturing

Role of Fluid Diffusivity in the Spatiotemporal Migration of Induced Earthquakes During Hydraulic Fracturing in Unconventional Reservoirs

Stress Chatter Via Fluid Flow and Fault Slip in a Hydraulic Fracturing‐Induced Earthquake Sequence in the Montney Formation, British Columbia

Large extensional earthquakes push-up terrific amount of fluids

Coseismic fault sealing and fluid pressurization during earthquakes

Fluid-injection control on energy partitioning during the earthquake cycle

Fault slip in hydraulic stimulation of geothermal reservoirs: Governing mechanisms and process-structure interaction

Poroelastic effects associated with earthquakes on overpressured reverse and normal faults

Mapping finite-fault slip with spatial correlation between seismicity and point-source Coulomb failure stress change

Separating Injection‐Driven and Earthquake‐Driven Induced Seismicity by Combining a Fully Coupled Poroelastic Model With Interpretable Machine Learning

Dilatancy-induced fluid pressure drop during dynamic rupture: Direct experimental evidence and consequences for earthquake dynamics

Interaction of natural and hydraulic fractures: the impact on reservoir pressure buildup and risk of shear fault reactivation in the Upper Devonian Duvernay Formation, Fox Creek, Alberta