Effect of initial pressure on explosion characteristics of 2, 3, 3, 3–tetrafluoropropene

Yi Liu,Yuxiao Li,Dongfeng Zhao,Hanhai Dong
DOI: https://doi.org/10.1016/j.jlp.2020.104320
IF: 3.916
2021-03-01
Journal of Loss Prevention in the Process Industries
Abstract:<p>With the popularity of refrigerants in the process industries, the potential safety problems caused by the use of refrigerants have attracted worldwide attention as people have realized the inherent explosion characteristics of refrigerants themselves. This paper studied the explosion characteristics of refrigerant 2, 3, 3, 3–tetrafluoropropene (R1234yf) at different concentrations and initial pressures based on a 20 L sphere explosion vessel. The experimental results illustrated the peak overpressure of R1234yf increased with the rise of initial pressure. At a constant ambient temperature of 25 °C, the maximum rate of pressure rise and deflagration index showed an N-shaped trend with the increase of the refrigerant concentration from 6.8% to 10%. The maximum rate of pressure rise and deflagration index increased first and then decreased with the increase of the refrigerant concentration from at atmospheric pressure, while they presented an M-shaped trend at pressurization condition. The peak overpressure, the maximum rate of pressure rise, and deflagration index reached 0.742 MPa, 4.04 MPa s<sup>−1</sup>, and 1.1 MPa.m.s<sup>−1</sup> with a refrigerant concentration of 7.6%, respectively, which were less than those of refrigerant R290 and R32 at the optimal concentration. Furthermore, R1234yf exhibited better safety performance compared with refrigerant R32 in the same flammability classification.</p>
engineering, chemical
What problem does this paper attempt to address?