Abstract:A porous composite of Si@rGO@C‐SD‐AlO has been fabricated by using a precursor induced assembly strategy and combined with the spray drying and an atomic layer deposition process. Protonated chitosan plays the dual roles of inducer for the assembly of graphene oxide sheets and the precursor for amorphous carbon. The composite can be used as a high‐performance anode for lithium‐ion batteries and it shows superior electrochemical performance, for example, excellent multiplicative performance (806 mAh g−1 at 5000 mA g−1), preferable initial Coulomb efficiency (up to 76.7%), high reversible capacity (1477 mAh g−1 after 500 cycles at 500 mA g−1), and excellent long‐cycle cycling stability (930 mAh g−1 after 1000 cycles at 1000 mA g−1). The theoretical capacity of pristine silicon as anodes for lithium‐ion batteries (LIBs) can reach up to 4200 mAh g−1, however, the low electrical conductivity and the huge volume expansion limit their practical application. To address this challenge, a precursor strategy has been explored to induce the curling of graphene oxide (GO) flakes and the enclosing of Si nanoparticles by selecting protonated chitosan as both assembly inducer and carbon precursor. The Si nanoparticles are dispersed first in a slurry of GO by ball milling, then the resulting dispersion is dried by a spray drying process to achieve instantaneous solution evaporation and compact encapsulation of silicon particles with GO. An Al2O3 layer is constructed on the surface of Si@rGO@C‐SD composites by the atomic layer deposition method to modify the solid electrolyte interface. This strategy enhances obviously the electrochemical performance of the Si as anode for LIBs, including excellent long‐cycle stability of 930 mAh g−1 after 1000 cycles at 1000 mA g−1, satisfied initial Coulomb efficiency of 76.7%, and high rate ability of 806 mAh g−1 at 5000 mA g−1. This work shows a potential solution to the shortcomings of Si‐based anodes and provides meaningful insights for constructing high‐energy anodes for LIBs.

Modification based on primary particle level to improve the electrochemical performance of SiO -based anode materials

TiO2/Reduced‐Graphene‐Oxide Double‐Layer‐Coated SiO as High‐Performance Anode for Lithium‐Ion Batteries

A Bm-Sio/ni/rgo Composite As an Anode Material for Lithium-Ion Batteries

Nanostructured SiOx-based anodes synthesized by a scalable micelle assisted method for high-performance lithium-ion battery

Nanostructured SiO -Based Anodes Synthesized by a Scalable Micelle Assisted Method for High-Performance Lithium-Ion Battery

Rigid TiO2- x coated mesoporous hollow Si nanospheres with high structure stability for lithium-ion battery anodes

Improved lithium storage performance of pomegranate-like Si@NC/rGO composite anodes by facile in-situ nitrogen doped carbon coating and freeze drying processes

Zinc oxide assisted synthesis of a holey carbon shell and graphene sheet supported silicon nanoparticle composite anode for lithium-ion batteries

Carbon-coated SiOx/TiO2 composite nanospheres with conductive TiO2 nanocrystals as anode materials for lithium-ion batteries

A Three Dimensional SiOx/C@RGO Nanocomposite As a High Energy Anode Material for Lithium-Ion Batteries

Titanium Monoxide-Stabilized Silicon Nanoparticles with a Litchi-like Structure as an Advanced Anode for Li-ion Batteries

Preparation of SiO 2 /rGO/CNTs composite and application for lithium‐ion‐battery anodes

Coupling ultrafine SiO2 nanoparticles with three-dimensional porous Ti3C2Tx MXene as anode materials for high-performance lithium-ion batteries

Ternary perovskite nickel titanate/reduced graphene oxide nano-composite with improved lithium storage properties

Reduced Graphene Oxide-Encaged Submicron-Silicon Anode Interfacially Stabilized by Al2O3 Nanoparticles for Efficient Lithium-Ion Batteries

Artificial solid electrolyte interphase modified porous SiO composite as anode material for lithium ion batteries

Ternary Si–SiO–Al Composite Films as High-Performance Anodes for Lithium-Ion Batteries

Composite design for electrochemical improvement through prelithiated Li2SiO3 in rice husk-derived SiO2/rGO as lithium-ion battery anode

TiO2/NiO/reduced Graphene Oxide Nanocomposites As Anode Materials for High-Performance Lithium Ion Batteries

Precursor Induced Assembly of Si Nanoparticles Encapsulated in Graphene/Carbon Matrices and the Influence of Al2O3 Coating on their Properties as Anode for Lithium‐Ion Batteries

Enhanced Stability Lithium-Ion Battery Based on Optimized Graphene/Si Nanocomposites by Templated Assembly