Abstract:A porous composite of Si@rGO@C‐SD‐AlO has been fabricated by using a precursor induced assembly strategy and combined with the spray drying and an atomic layer deposition process. Protonated chitosan plays the dual roles of inducer for the assembly of graphene oxide sheets and the precursor for amorphous carbon. The composite can be used as a high‐performance anode for lithium‐ion batteries and it shows superior electrochemical performance, for example, excellent multiplicative performance (806 mAh g−1 at 5000 mA g−1), preferable initial Coulomb efficiency (up to 76.7%), high reversible capacity (1477 mAh g−1 after 500 cycles at 500 mA g−1), and excellent long‐cycle cycling stability (930 mAh g−1 after 1000 cycles at 1000 mA g−1). The theoretical capacity of pristine silicon as anodes for lithium‐ion batteries (LIBs) can reach up to 4200 mAh g−1, however, the low electrical conductivity and the huge volume expansion limit their practical application. To address this challenge, a precursor strategy has been explored to induce the curling of graphene oxide (GO) flakes and the enclosing of Si nanoparticles by selecting protonated chitosan as both assembly inducer and carbon precursor. The Si nanoparticles are dispersed first in a slurry of GO by ball milling, then the resulting dispersion is dried by a spray drying process to achieve instantaneous solution evaporation and compact encapsulation of silicon particles with GO. An Al2O3 layer is constructed on the surface of Si@rGO@C‐SD composites by the atomic layer deposition method to modify the solid electrolyte interface. This strategy enhances obviously the electrochemical performance of the Si as anode for LIBs, including excellent long‐cycle stability of 930 mAh g−1 after 1000 cycles at 1000 mA g−1, satisfied initial Coulomb efficiency of 76.7%, and high rate ability of 806 mAh g−1 at 5000 mA g−1. This work shows a potential solution to the shortcomings of Si‐based anodes and provides meaningful insights for constructing high‐energy anodes for LIBs.

Preparation of SiO 2 /rGO/CNTs composite and application for lithium‐ion‐battery anodes

Three-dimensional Carbon-Coated Si/rGO Nanostructures Anchored by Nickel Foam with Carbon Nanotubes for Li-ion Battery Applications

CNTs and rGO synergistically enhance the cycling stability of yolk-shell silicon anodes for efficient lithium storage

Graphene‐Encapsulated Si@C with Dual Carbon Layer Structure as High‐Performance Anode Materials for Lithium‐Ion Batteries

Synthesis and Electrochemical Performance of Electrostatic Self-Assembled Nano-Silicon@N-Doped Reduced Graphene Oxide/Carbon Nanofibers Composite as Anode Material for Lithium-Ion Batteries

Elaborate interface design of SnS2/SnO2@C/rGO nanocomposite as a high-performance anode for lithium-ion batteries

Carbon nanotubes anchored SiO x composite anode for high cyclic stability lithium-ion batteries

Graphene and Carbon Nanotube Dual-Decorated SiO x Composite Anode Material for Lithium-Ion Batteries

Hierarchically structured silicon/graphene composites wrapped by interconnected carbon nanotube branches for lithium‐ion battery anodes

Constructing three-dimensional Carbon nanotubes/Carbon bifunctional conductive network by in situ chemical vapor deposition for SiO x anode in high-energy lithium-ion batteries

Precursor Induced Assembly of Si Nanoparticles Encapsulated in Graphene/Carbon Matrices and the Influence of Al2O3 Coating on their Properties as Anode for Lithium‐Ion Batteries

Controllable Preparation to Boost High Performance of Nanotubular SiO2@C as Anode Materials for Lithium-Ion Batteries

Synthesis of Si/rGO nano-composites as anode electrode for lithium-ion battery by CTAB and citrate: physical properties and voltage–capacity cyclic characterizations

Using Sandwiched Silicon/Reduced Graphene Oxide Composites with Dual Hybridization for Their Stable Lithium Storage Properties

Carbon-coated silicon/graphite oxide composites as anode for highly stable lithium-ion batteries

Three-dimensional interwoven CoS2/reduced graphene oxide/carbon nanotubes composite as anode materials for high-performance lithium-ion batteries

Silicon/Carbon Nanoparticles Assembled with Multifunction Carbon Nanotubes/Sheets as High-Performance Anode of Lithium-Ion Batteries

Construction and Electrochemical Properties of Si/rGO@CN as Anode Materials for High-performance Lithium-ion Batteries

Facile low-temperature synthesis of a hierarchical Sn-SnO2/CNT/rGO composite for anode material in lithium-ion batteries

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Preparation of SiOx–TiO2/Si/CNTs composite microspheres as novel anodes for lithium-ion battery with good cycle stability