Abstract:A porous composite of Si@rGO@C‐SD‐AlO has been fabricated by using a precursor induced assembly strategy and combined with the spray drying and an atomic layer deposition process. Protonated chitosan plays the dual roles of inducer for the assembly of graphene oxide sheets and the precursor for amorphous carbon. The composite can be used as a high‐performance anode for lithium‐ion batteries and it shows superior electrochemical performance, for example, excellent multiplicative performance (806 mAh g−1 at 5000 mA g−1), preferable initial Coulomb efficiency (up to 76.7%), high reversible capacity (1477 mAh g−1 after 500 cycles at 500 mA g−1), and excellent long‐cycle cycling stability (930 mAh g−1 after 1000 cycles at 1000 mA g−1). The theoretical capacity of pristine silicon as anodes for lithium‐ion batteries (LIBs) can reach up to 4200 mAh g−1, however, the low electrical conductivity and the huge volume expansion limit their practical application. To address this challenge, a precursor strategy has been explored to induce the curling of graphene oxide (GO) flakes and the enclosing of Si nanoparticles by selecting protonated chitosan as both assembly inducer and carbon precursor. The Si nanoparticles are dispersed first in a slurry of GO by ball milling, then the resulting dispersion is dried by a spray drying process to achieve instantaneous solution evaporation and compact encapsulation of silicon particles with GO. An Al2O3 layer is constructed on the surface of Si@rGO@C‐SD composites by the atomic layer deposition method to modify the solid electrolyte interface. This strategy enhances obviously the electrochemical performance of the Si as anode for LIBs, including excellent long‐cycle stability of 930 mAh g−1 after 1000 cycles at 1000 mA g−1, satisfied initial Coulomb efficiency of 76.7%, and high rate ability of 806 mAh g−1 at 5000 mA g−1. This work shows a potential solution to the shortcomings of Si‐based anodes and provides meaningful insights for constructing high‐energy anodes for LIBs.

Synthesis of Si/rGO nano-composites as anode electrode for lithium-ion battery by CTAB and citrate: physical properties and voltage–capacity cyclic characterizations

Construction and Electrochemical Properties of Si/rGO@CN as Anode Materials for High-performance Lithium-ion Batteries

Novel Silicon Nanoparticles with Nitrogen-Doped Carbon Shell Dispersed in Nitrogen-Doped Graphene and CNTs Hybrid Electrode for Lithium Ion Battery

Preparation of SiO 2 /rGO/CNTs composite and application for lithium‐ion‐battery anodes

Synthesis and Electrochemical Performance of Electrostatic Self-Assembled Nano-Silicon@N-Doped Reduced Graphene Oxide/Carbon Nanofibers Composite as Anode Material for Lithium-Ion Batteries

Silicon nanoparticles encapsulated in Si3N4/carbon sheaths as an anode material for lithium-ion batteries

Three-dimensional Carbon-Coated Si/rGO Nanostructures Anchored by Nickel Foam with Carbon Nanotubes for Li-ion Battery Applications

Precursor Induced Assembly of Si Nanoparticles Encapsulated in Graphene/Carbon Matrices and the Influence of Al2O3 Coating on their Properties as Anode for Lithium‐Ion Batteries

Hierarchically structured silicon/graphene composites wrapped by interconnected carbon nanotube branches for lithium‐ion battery anodes

Using Sandwiched Silicon/Reduced Graphene Oxide Composites with Dual Hybridization for Their Stable Lithium Storage Properties

High Rate Capability and Long Cycling Life of Graphene-Coated Silicon Composite Anodes for Lithium Ion Batteries

Composite design for electrochemical improvement through prelithiated Li2SiO3 in rice husk-derived SiO2/rGO as lithium-ion battery anode

In-situ processing nano-porous silicon into 3D conductive structure as high-capacity anode for lithium-ion batteries

Carbon-coated silicon/graphite oxide composites as anode for highly stable lithium-ion batteries

Elaborate interface design of SnS2/SnO2@C/rGO nanocomposite as a high-performance anode for lithium-ion batteries

Micro-sized Spherical Silicon@carbon@graphene Prepared by Spray Drying As Anode Material for Lithium-Ion Batteries

Porous, Encapsulated Si–O–C Lithium-Ion Battery Anode Materials from Silicone-Containing Polyesters: Influences of Graphene Oxides

Chemical Dealloying Synthesis of Porous Silicon Anchored by in Situ Generated Graphene Sheets As Anode Material for Lithium-Ion Batteries

Graphene‐Encapsulated Si@C with Dual Carbon Layer Structure as High‐Performance Anode Materials for Lithium‐Ion Batteries

Pomegranate structured C@pSi/rGO composite as high performance anode materials of lithium-ion batteries

Characteristics and electrochemical performances of silicon/carbon nanofiber/graphene composite films as anode materials for binder-free lithium-ion batteries