Abstract:Transfer printing, as an important assembly technique, has attracted much attention due to its valuable merits to develop novel forms of electronics such as stretchable inorganic electronics requiring the heterogeneous integration of inorganic materials with soft elastomers. Here, we report on a laser-driven programmable non-contact transfer printing technique via a simple yet robust design of active elastomeric microstructured stamp that features cavities filled with air and embedded under the contacting surface, a micro-patterned surface membrane that encapsulates the air cavities and a metal layer on the inner-cavity surfaces serving as the laser-absorbing layer. The micro-patterned surface membrane can be inflated dynamically to control the interfacial adhesion, which can be switched from strong state to weak state by more than three orders of magnitude by local laser heating of the air in the cavity with a temperature increase below 100°C. Theoretical and experimental studies reveal the fundamental aspects of the design and fabrication of the active elastomeric microstructured stamp and the operation of non-contact transfer printing. Demonstrations in the programmable transfer printing of micro-scale silicon platelets and micro-scale LED chips onto various challenging receivers illustrate the extraordinary capabilities for deterministic assembly that are difficult to address by existing printing schemes, thereby creating engineering opportunities in areas requiring the heterogeneous integration of diverse materials such as curvilinear electronics and MicroLED displays.

A Single Microtip Shape Memory Polymer Surface with Reversible Dry Adhesion for Transfer Printing (Adv. Mater. Technol. 1/2024)

A Soft Shape Memory Reversible Dry Adhesive

Microstructured Shape Memory Polymer Surfaces with Reversible Dry Adhesion.

A Thermal Actuated Switchable Dry Adhesive with High Reversibility for Transfer Printing

Reversible Dry Micro-Fibrillar Adhesives with Thermally Controllable Adhesion

Switchable Dry Adhesive Based on Shape Memory Polymer with Hemispherical Indenters for Transfer Printing

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

Thermal Controlled Tunable Adhesive for Deterministic Assembly by Transfer Printing

High Fidelity Tape Transfer Printing Based on Chemically Induced Adhesive Strength Modulation

Rapidly tunable and highly reversible bio-inspired dry adhesion for transfer printing in air and a vacuum.

Direct Laser Writing-Based Programmable Transfer Printing via Bioinspired Shape Memory Reversible Adhesive

Switchable Adhesive Based on Shape Memory Polymer with Micropillars of Different Heights for Laser-Driven Noncontact Transfer Printing

Magnetically Driven Non‐Contact Transfer Printing Based on a Bi‐Stable Elastomeric Stamp

Shape‐Memory Polymers: Deformable, Programmable, and Shape‐Memorizing Micro‐Optics (adv. Funct. Mater. 26/2013)

Micro-Transfer Printing of Photoresist Using Adhesion- Switchable Stamp for Patterning Unconventional Surface

Microstructured elastomeric surfaces with reversible adhesion and examples of their use in deterministic assembly by transfer printing

Laser-driven Programmable Non-Contact Transfer Printing of Objects Onto Arbitrary Receivers Via an Active Elastomeric Microstructured Stamp

Programmable and Scalable Transfer Printing with High Reliability and Efficiency for Flexible Inorganic Electronics

High-resolution nanotransfer printing applicable to diverse surfaces via interface-targeted adhesion switching

Mechanics of Reversible Adhesion

A Theoretical Model of Reversible Adhesion in Shape Memory Surface Relief Structures and Its Application in Transfer Printing