Abstract:Abstract One of the biggest challenges when drilling in deep water is the excessive dependence of drilling fluid rheological properties on temperature. Conventional drilling fluids often have high viscosity at the seabed temperature, which increases the Equivalent Circulating Density (ECD) and surge pressures when running pipe or initiating circulation, elevating the risk of fracturing the wellbore. This paper describes the development of a drilling fluid for deep-water applications, with minimum viscosity variation with temperature. Multiple laboratory formulations were evaluated during the development of the new, non-aqueous based drilling fluid that meets deep-water's challenging rheological and barite suspension requirements. CaCl2 brine was used as the internal emulsion phase, and synthetic isomerized olefin as the base oil. The testing followed the API Recommended Practice for Field Testing Oil-based Drilling Fluids. Samples were aged at dynamic conditions for 16 hours at several temperatures. Then, rheological properties and high-pressure high-temperature (HPHT) fluid loss, emulsion stability, and dynamic sagging were tested. Static sag experiments were also carried out for up to seven days together with improved step down rheology tests. A low-impact, non-aqueous drilling fluid (LIDF) was designed to minimize ECD increases by reducing the effect of cold temperature on the fluid viscosity. The fluid offers a superior low viscosity profile and rapid-set, easy-break gel strengths, while maintaining low shear rate viscosity at high temperatures with optimal weight material suspension. The fluid is also compatible with all contaminants usually found during the drilling operation and meets all the regulatory requirements for the Gulf of Mexico and other deep-water operational areas. Field application demonstrated that LIDF reduced the effect of temperature on the fluid rheological properties and minimized the risk of induced formation losses. These same rheological features reduced non-productive time associated with cement displacement and barite sagging. Supporting laboratory and field data are presented to demonstrate the superior performance of the fluid in maintaining rheological and barite suspension properties over a wide range of temperatures. The properties of the LIDF are achieved by matching the effects of emulsifier, organophilic clay, and rheological modifiers to maintain correct rheological properties at low and high temperatures.

High-temperature high-pressure salt-resistant high-density drilling fluid

A high-temperature resistant and high-density polymeric saturated brine-based drilling fluid

A Polymer-based Drilling Fluid with High Temperature, Salt and Calcium Resistance Property

Temperature- and Salt-Resistant Micro-Crosslinked Polyampholyte Gel as Fluid-Loss Additive for Water-Based Drilling Fluids

Experimental investigation of a new weak-gel-type clay-free and water-based drilling fluid with high-temperature and high-salt resistance for determining its optimized formulation

pH-Responsive Drilling Fluid With High-Temperature and High-Density Performance

Preparation and performance evaluation of heat resistant and salt resistant anionic fluid loss reducer for water‐based drilling fluid

Study of a High-Temperature and High-Density Water-Based Drilling Fluid System Based on Non-sulfonated Plant Polymers

Nano-Modified Polymer Gels as Temperature- and Salt-Resistant Fluid-Loss Additive for Water-Based Drilling Fluids

Laponite-polymer composite as a rheology modifier and filtration loss reducer for water-based drilling fluids at high temperature

A zwitterionic copolymer as fluid loss reducer for water-based drilling fluids in high temperature and high salinity conditions

Application of a Core-Shell Structure Nano Filtration Control Additive in Salt-Resistant Clay-Free Water-Based Drilling Fluid

Research and Application of High Temperature and Ultrahigh Density Drilling Fluid in Deep Wells

Synthesis of a Novel Filtrate Reducer and Its Application in Water-Based Drilling Fluid for Ultra-High-Temperature Reservoirs

High Temperature Calcium and Salt Resistant Polymer Thinner JNL-1 for Water Base Drilling Fluids:Preparation and Evaluation

A micro-crosslinked amphoteric hydrophobic association copolymer as high temperature- and salt-resistance fluid loss reducer for water-based drilling fluids

Investigation on Filtration Control of Zwitterionic Polymer AADN in High Temperature High Pressure Water-Based Drilling Fluids

Preparation of a salt-responsive zwitterionic hydrophobically associating polymer and its application in a saturated sodium chloride drilling fluid

Comb polymer/layered double hydroxide (LDH) composite as an ultrahigh temperature filtration reducer for water-based drilling fluids

Preparation and properties of fluid loss reducer for anti-CO32- pollution in ultra-high temperature and high salt drilling fluids

Low Impact Drilling Fluid for Deepwater Drilling Frontier