Abstract:In order to analyze and predict the corrosion ratio and rust layer distribution of steel rebar embedded in reinforced concrete under time-varying climatic conditions, a self-balancing steel corrosion model was established by connecting the environmental temperature, humidity, external chloride ions and oxygen concentration to the potential distribution and current density of the steel using finite element method. The model covered the whole corrosion process of steel rebar in concrete under natural climate, including the steel rebar depassivation, steel corrosion propagation and the rust layer expansion on the surface of steel rebar. In the proposed model, the microcell and macrocell corrosion were coupled by electrochemical polarization, and the cathode-to-anode area ratio was determined by the time-varying chloride distribution at the rebar surface. Taking the diffusion of chloride ions and oxygen in concrete into account, the distribution of corrosion potential of reinforcement, the change of corrosion current density of reinforcement, and the distribution of rust layer on the surface of reinforcement can be obtained based on the variation of natural temperature and humidity. The proposed model was validated utilizing the experimental data from the literatures. On this basis, a discussion about the influence of long-term climatic environments on the corrosion kinetics were conducted. The results suggest that environmental temperature and relative humidity affect the steel corrosion process mainly by affactting the chloride and oxygen diffusion coefficients, concrete resistivity, and concentration of dissolved oxygen in concrete pore solution. The corrosion current density of steel in concrete is sensitively influenced by the environmental temperature more than relative humidity. Although the initial exposure time has a significant impact on the accumulation process of chloride on steel surface within one climatic cycle, it has little influence on the final chloride distribution at the end of the period. However, the initial exposure time remarkably influences the evolution profile of rust layer thickness during the climatic cycle. The steel rebar initially exposed to a higher temperature suffers from more severe corrosion than that initially exposed to a lower temperature.

Stress corrosion cracking behavior of 20MnTiB high-strength bolts in simulation of humid climate in Chongqing

Test on shear behavior of less-tightened high-strength bolted connections

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

High-Temperature Mechanical Properties of Artificially Simulated Corroded Q500MC Structural Steel

Multi-scale experimental study on the failure mechanism of high-strength bolts under highly mineralized environment

Atmospheric corrosion performance of structural steel bolts in the Wenchang marine environment, South China

Numerical simulation of electrochemical mechanism of steel rebar corrosion in concrete under natural climate with time-varying temperature and humidity

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

Experimental study on the corrosion performance of weathering high-strength bolt connections

Compressive Behaviour of Corroded Thin-Walled Circular Section Steel Stub Columns

Experimental Investigation of Stress Corrosion Characteristics for 16mnr Steel in Nitrate Solution

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Laboratory-Based Investigation into Stress Corrosion Cracking of Cable Bolts

STRESS CORROSION CRACKING BEHAVIOR OF A NEW KIND OF ULTRAHIGH STRENGTH STEEL Cr12Ni4Mo2Co14 IN ACID ENVIRONMENT

Monotonic and fatigue behavior of steel-concrete composite beams subjected to corrosion

Shear performance of high-strength bolted connections with stainless-clad steel plates in a corrosive environment

Plasticity and ductile fracture of high-strength bolt materials under monotonic tension

Corrosion-induced mechanical properties of shear bolted connections in high-strength weathering steel

Full-scale testing and numerical modelling of segmental-joint performance with corroded bolt

Electrochemical Evaluation of Stress Corrosion Cracking Susceptibility of Ti-6Al-3Nb-2Zr-1Mo Alloy Welded Joint in Simulated Deep-Sea Environment

Stress corrosion cracking behavior on carbon steel under the synergistic effect of chloride and bicarbonate ions in alternating wet-dry environment