Abstract:Over the past few years, a number of implicit/explicit finite element models have been introduced for the purpose of tackling the problems of wheel-rail interaction. Yet, most of those finite element models encounter common numerical difficulties. For instance, initial gaps/penetrations between two contact bodies, which easily occur when realistic wheel-rail profiles are accounted for, would trigger the problems of divergence in implicit finite element simulations. Also, redundant, insufficient or mismatched mesh refinements in the vicinity of areas in contact can lead to either prohibitive calculation expenses or inaccurate implicit/explicit finite element solutions. To address the abovementioned problems and to improve the performance of finite element simulations, a novel modelling strategy has been proposed. In this strategy, the three-dimensional explicit finite element analysis is seamlessly coupled with the two-dimensional geometrical contact analysis. The contact properties in the three-dimensional finite element analyses, such as the initial "Just-in-contact" point, the exact wheel local rolling radius, etc., which are usually a priori unknown, are determined using the two-dimensional geometrical contact model. As part of the coupling strategy, a technique has been developed for adaptive mesh refinement. The mesh and mesh density of wheel-rail finite element models change adaptively depending on the exact location of the contact areas and the local geometry of contact bodies. By this means, a good balance between the calculation efficiency and accuracy can be achieved. Last, but not least, the advantage of the coupling strategy has been demonstrated in studies on the relationship between the initial slips and the steady frictional rolling state. Finally, the results of the simulations are presented and discussed.

Collision characteristics of the intermediate coupler of a rail vehicle

Three-dimensional Finite Element Simulation on Moving Load Induced Track Response over Stiffness-varied Base

General Reduced Vehicle Model for Simulating Truck-Bridge Pier Collisions

Reduced Models for Simulating Collisions Between Trucks and Bridge Piers

Optimization design of the coupler overload protection component: numerical simulation and experimental validation

Simulation Method for Couplers and Buffers in Train Collision Calculations

Dynamic performances of an innovative coupler used in heavy haul trains

Evaluation of coupled finite element/meshfree method for a robust full-scale crashworthiness simulation of railway vehicles

Numerical study on existing RC circular section members under unequal impact collision

An Investigation of a Locomotive Structural Crashworthiness Using Finite Element Simulation

Dynamic performance evaluation of rail fastening system based on a refined vehicle-track coupled dynamics model

Numerical and experimental study on the design strategy of a new collapse zone structure for railway vehicles

Frontal crashworthiness structure analysis and optimization of electric vehicle

Improving the performance of finite element simulations on the wheel-rail interaction by using a coupling strategy

Analysis and Improvement for Key Parts of Car Based on Frontal Crashworthiness Simulation

Correlation study between the square cone energy-absorbing structure and the frontal collision behavior of leading vehicles

The Offset Crashworthiness and Parameter Optimization of C-Shaped Frame for Rail Vehicle Anti-Climbing Device

On Crashworthiness and Energy-Absorbing Mechanisms of Thick CFRP Structures for Railway Vehicles

Mechanisms Underlying Rail Corrugation on Tracks Equipped with Cologne-Egg Fasteners

Passenger Car-Body Crashworthiness Based on the Force Transmission Path of Frontal Impact

Crashworthiness analysis of shrink circular tube energy absorbers with anti-climbers under multiple loading cases