Abstract:Automatic AAR coupling mechanisms are used worldwide for the inter-connection of rail vehicles. Coupling failures, running instability, longitudinal jerks and other issues limit the usage of these coupling mechanisms. Couplers of these mechanisms require certain slack to facilitate appropriate coupling. The presence of slack even during coupled state allows the possibility of both translational and rotational motions of couplers inside the slack regime. Resulting interaction between contours of interacting coupler heads give rise to impacts and frictional rubbing actions. This study examines the implications of coupler slack on the longitudinal dynamics of rail vehicles. A simplified two degree of freedom model of such a coupling mechanism is developed, incorporating impacts and frictional actions. The study is limited to longitudinal motion, permitting only translational movement between couplers. Intermittent interactions between profiles contours at various contact points due to possible rotation between couplers are not considered. Instead, it is approximated by defining a single contact location manually. This contact location is utilised to estimate resultant impact and friction forces along the longitudinal direction. The coupler system is excited with a harmonic force and simulations are carried out for two explicit values of excitation frequency. It is observed that intermittent impacts and stick-slips resulting from slack are significant in the longitudinal force transfer between two vehicles and cause steep variations in acceleration, which in turn become the cause for jerks of considerable magnitude. Considerably higher magnitude jerks are observed at higher excitation frequencies than those at lower excitation frequencies. It is concluded that a smaller averaging sample time for acceleration is required for realistic jerk computations.

Dynamic performances of an innovative coupler used in heavy haul trains

Countermeasures for preventing coupler jack-knifing of slave control locomotives in 20,000-tonne heavy-haul trains during cycle braking

Coupler separation of slave locomotive in a 20,000-tonne combined heavy-haul train during air-braking release

Dynamics Study of Straddle-Type Monorail Vehicle With Single-Axle Bogies-Based Full-Scale Rigid-Flexible Coupling Dynamic Model

Optimization design of the coupler overload protection component: numerical simulation and experimental validation

Influence of Cyclic Pneumatic Brake on the Longitudinal Dynamics of Heavy-Haul Combined Trains

Study on longitudinal dynamics of heavy haul trains running on long and steep downhills

Improving the stability of high-speed trains using an innovative passive yaw damper

Collision characteristics of the intermediate coupler of a rail vehicle

Research on the Longitudinal and Transverse Coupling Dynamic Behavior and Yaw Stability of an Articulated Electric Bus

Dynamic performance of locomotive electric drive system under excitation from gear transmission and wheel-rail interaction

Dynamic performance analysis of a urban rail vehicle based on rigid-flexible coupling

Dynamic Damage Detection and Assessment on the Bogie Frame of High-Speed Train Based on the Coupled Elastic and Multibody Dynamics Scheme

Influence of slack of automatic AAR couplers on longitudinal dynamics and jerk behaviour of rail vehicles

A heavy-haul train longitudinal-vertical coupled dynamics model and its dynamic behaviour under emergency braking

Rigid-Flexible Coupling Dynamic Analysis of Excavator Drive Axle

Numerical simulation of aircraft arresting process with an efficient full-scale rigid-flexible coupling dynamic model

Study on Longitudinal Force and Curve Negotiation Performance of 20,000 t Heavy-haul Train

Simulation Method for Couplers and Buffers in Train Collision Calculations

A dynamic analysis scheme for the suspended monorail vehicle–curved bridge coupling system

Large DOF Coupler/Draft Gear System Models for Rail Vehicles