Abstract:The present paper describes the technological solution for obtaining Cu, Zn, Pb, and Ag from jarosite waste raw material, with its simultaneous separation from In and Fe. By roasting at low temperatures, iron was transformed from the Fe2(SO4)3 form into Fe2O3, which is insoluble in water and slightly soluble in acid. Copper sulfate and zinc sulfate are present in jarosite as sulfates. During temperature roasting, the copper and zinc were still in the form of CuSO4 and ZnSO4, i.e., they were easily dissolved in water. This procedure led to good selectivity of Cu and Zn compared to Fe. After water leaching, PbSO4 and Ag2SO4 remained in the solid residue. By treating jarosite with a content of 0.7% Cu, 5.39% Zn, and 5.68% Pb, products of commercial quality were obtained. By roasting jarosite in an electric furnace and leaching the roasted sample in water, leaching degrees of 91.07%, 91.97%, and 9.60% were obtained for Cu, Zn, and Fe, respectively. Using 1 M NaOH in the leaching solution, 99.93% Fe was precipitated to pH = 4. Cu in the form of CuSO4 was further treated by cementation with Zn, after which cement copper was obtained as a commercial product. Zn in the form of ZnSO4 was further treated by precipitation with Na2CO3 to obtain ZnCO3 concentrate of commercial grade. The total recovery of Pb and Ag, which were treated by chloride leaching, was 96.05% and 87.5%, respectively. The resulting NaPbCl3 solution was further treated with Na2CO3 solution, whereby PbCO3 was obtained as a commercial product. The produced PbCO3 could be further subjected to roasting to obtain soluble PbO. In these investigations, PbCO3 was smelted where a Pb anode was obtained; this was electrolytically refined to a Pb cathode. The proposed process does not pollute the environment with As and Cd.

Recovery of Silver and Lead from Jarosite Residues by Roasting and Reducing Pyrometallurgical Processes

Anglesite and silver recovery from jarosite residues through roasting and sulfidization-flotation in zinc hydrometallurgy

Copper, Zinc, and Lead Recovery from Jarosite Pb–Ag Tailings Waste (Part 2)

Lead Recovery from a Lead Concentrate throughout Direct Smelting Reduction Process with Mixtures of Na2CO3 and SiC to 1000 °C

Molten salt mediated low-temperature direct roasting of spent lead paste

Process flowsheet development for selective arsenic removal, lead and antimony recovery from lead softening slag

Recovery of metals from jarosite of hydrometallurgical nickel production by thermal treatment and leaching

Innovative methodology for the utilization of low-grade pyrite cinder containing heavy metals via hydrothermal alkali melting followed by chlorination roasting

Simultaneous recovery of Fe2O3 and PbCl2 from hazardous jarosite residues via hydrothermal phase transformation with NaCl

Galvanic sludge metals recovery by pyrometallurgical and hydrometallurgical treatment

Recycling of hazardous jarosite residues based on hydrothermal crystal transformation

Efficient extraction of metals (Fe, Zn, Pb) from hazardous jarosite using ionic liquid and waste-derived solvents

Recovery of Copper from Slags Through Flotation at the Hernán Videla Lira Smelter

Recovery of Copper, Lead and Zinc from Copper Flash Converting Slag by the Sulfurization-Reduction Process

Optimization of a Pyrometallurgical Process to Efficiently Recover Valuable Metals from Commercially Used Lithium-Ion Battery Cathode Materials LCO, NCA, NMC622, and LFP

Recovery of Zinc and Silver from Zinc Acid-Leaching Residue by Sulphation Roasting-Water Leaching of Zinc and Iron-Silver Chlorination Leaching Method

Recovery of lead and silver from zinc acid-leaching residue via a sulfation roasting and oxygen-rich chlorination leaching method

Recovery of valuable elements from pyrite pyrolysis slag using magnetic separation-flotation technique

Recovery of iron from waste slag of pyrite processing using reduction roasting magnetic separation method

Recovery of Zinc and Copper from Lead Slag by the Combined Process of Beneficiation and Roasting

Phase Evolution and Recovery Rate of Sb in Lead–Silver Slag Treated via Melting–Fuming Method