A facility for radiation hardness studies based on a medical cyclotron
John Anders,Saverio Braccini,Tommaso Stefano Carzaniga,Pierluigi Casolaro,Meghranjana Chatterjee,Gaia Dellepiane,Laura Franconi,Lea Halser,Armin Ilg,Isidre Mateu,Federico Meloni,Claudia Merlassino,Antonio Miucci,Roman Müller,Marco Rimoldi,Michele Weber
DOI: https://doi.org/10.1088/1748-0221/17/04/P04021
2022-03-22
Abstract:The development of instrumentation for operation in high-radiation environments represents a challenge in various research fields, particularly in particle physics experiments and space missions, and drives an ever-increasing demand for irradiation facilities dedicated to radiation hardness studies. Depending on the application, different needs arise in terms of particle type, energy and dose rate. In this article, we present a versatile installation based on a medical cyclotron located at the Bern University Hospital (Inselspital), which is used as a controlled 18-MeV proton source. This accelerator is used for daily production of medical radioisotopes, as well as for multidisciplinary research, thanks to a 6.5-meter long beam transfer line that terminates in an independent bunker, dedicated only to scientific activities. The facility offers a wide range of proton fluxes, due to an adjustable beam current from approximately 10 pA to the micro-ampere range, together with a series of steering and focusing magnets along the beamline that allow for the beam spot to be focused down to a few mm^2. The beamline can be instrumented with a variety of beam monitoring detectors, collimators, and beam current measurement devices to precisely control the irradiation conditions. The facility also hosts a well equipped laboratory dedicated to the characterisation of samples after irradiation. An experimental validation of the irradiation setup, with proton fluxes ranging from $5\times10^9$ cm$^{-2}$s$^{-1}$ to $4\times10^{11}$ cm$^{-2}$s$^{-1}$, is reported in this article.
Instrumentation and Detectors