Abstract:For perovskite based on a two‐step method, N‐methylpyrrolidone (NMP) is doped into the PbI2 solution to obtain a stable and homogeneous PbI2‐NMP complex. The interaction between NMP and FAI made it a bridge to promote the reaction between PbI2 and FAI, leading to (001)‐oriented quasi‐single‐crystal perovskite films with carrier lifetime of 1.5 μs and grain size larger than 3 μm. Solar cells exhibit an efficiency of 24.1% with working stability of T96 = 300 h. Controllable fabrication of formamidinium (FA)‐based perovskite solar cells (PSCs) with both high efficiency and long‐term stability is the key to their further commercialization. However, the diversity of PbI2 complexes and perovskite compositions usually leads to light sensitive PbI2 residues and phase impurities in the film, which can accelerate the device degradation. Here, the crystallization kinetics of FA‐based perovskite films are studied and a bridging‐solvent strategy is proposed to modulate the reaction kinetics between PbI2 and ammonium salts by prohibiting the formation of undesired intermediates. N‐methylpyrrolidone (NMP) solvent is introduced into the PbI2 precursor solution to obtain stable and homogeneous PbI2‐NMP complex films. The strong interaction between NMP and formamidinium iodide (FAI) molecules promotes the conversion from PbI2‐NMP into (001)‐oriented quasi‐single‐crystal perovskite films with negligible impurities, long carrier lifetime of 1.5 μs and a large grain size of 3 μm. The optimized PSCs exhibit a high power conversion efficiency of 24.1%, as well as superior shelf stability which maintains 95% initial efficiency after storage in air for 1200 h (T95 = 1200 h), and operating stability with T96 = 300 h under continuous working at the maximum power point. This work offers a simple and reproducible method for fabricating phase‐pure and uniaxially oriented perovskite films.

Orientated crystallization of FA-based perovskite via hydrogen-bonded polymer network for efficient and stable solar cells

Oriented Nucleation in Formamidinium Perovskite for Photovoltaics

Polymer-modified halide perovskite films for efficient and stable planar heterojunction solar cells.

Aqueous solvent-regulated crystallization and interfacial modification in perovskite solar cells with enhanced stability and performance

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Realizing Stable Perovskite Solar Cells with Efficiency Exceeding 25.6% Through Crystallization Kinetics and Spatial Orientation Regulation

Hydrogen-bond-bridged intermediate for perovskite solar cells with enhanced efficiency and stability

Reconstructing Subsurface Lattice for Stable Perovskite Photovoltaics

Tailored Phase Conversion under Conjugated Polymer Enables Thermally Stable Perovskite Solar Cells with Efficiency Exceeding 21.

CsPb2Br5 assisted direct crystallization of 3D perovskite phase for highly efficient and stable solar cells

Regulating the Crystallization of FAPbI3‐Based Perovskite with a Furan Substituted Ethylammonium Additive for Achieving Highly Efficient Solar Cells

Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells

Efficient and Stable Perovskite Solar Cells by Fluorinated Ionic Liquid–Induced Component Interaction

Stabilizing precursor solution and controlling crystallization kinetics simultaneously for high‐performance perovskite solar cells

Acetic Acid Assisted Crystallization Strategy for High Efficiency and Long-Term Stable Perovskite Solar Cell

Bridging‐Solvent Strategy for Quasi‐Single‐Crystal Perovskite Films and Stable Solar Cells

Oriented Low‐n Ruddlesden‐Popper Formamidinium‐Based Perovskite for Efficient and Air Stable Solar Cells

Heterogeneous Nucleation and Enhanced Charge Transfer via Amorphous Metal‐Organic Frameworks for Efficient and Stable Perovskite Solar Cells

A Thermodynamically Favored Crystal Orientation in Mixed Formamidinium/Methylammonium Perovskite for Efficient Solar Cells

Mitigating lattice strain and phase segregation of mixed-halide perovskite films via dual chloride additive strategy toward highly efficient and stable perovskite solar cells

Controlled Nucleation and Oriented Crystallization of Methylammonium‐Free Perovskites via In‐Situ Generated 2D Perovskite Phases