Abstract:The search for a fast and efficient process to treat water contaminated with pharmaceutical substances is ongoing and societally required due to the impact on the environment and human health. In this work, a photoelectrocatalytic (PEC) system, coupling visible-light photocatalysis and electrocatalysis with suspended and immobilised graphitic carbon nitride (g-C3N4), has been proved as a feasible alternative for the simultaneous degradation of a model persistent drug, viz. diclofenac (DCF), and the production of hydrogen peroxide (H2O2). A comprehensive study of the variables influencing PEC (visible-light emitting diode radiation and g-C3N4 load) is conducted. Moreover, the optimisation of the PEC process was accomplished through a Central Composite Face-Centred design of experiments, focusing on g-C3N4 load, immersed electrode area, and applied current intensity as key variables. From this CCFC design, the determined optimal working conditions were 0.76 g/L of g-C3N4, an electrode area of 6.38 cm2 and 58 mA of current intensity, leading to 92% DCF removal and 0.3 mM of produced H2O2 in a short period (5 min), which were experimentally validated (deviation lower than 1%). To overcome the drawbacks of operating with the g-C3N4 catalyst as powder, the synthesis of a novel material (g-C3N4@PAN) by electrospinning was carried out using polyacrylonitrile (PAN) and g-C3N4 as precursors to generate nanofibres. Characterisation techniques (Scanning Electron Microscopy, Diffuse Reflectance Fourier-Transform Infrared spectroscopy, and N2 adsorption-desorption isotherms) of the nanofibres allowed confirming a proper immobilisation assessing that the synthesis route is straightforward and enables obtaining physicochemical properties similar to those of g-C3N4 itself. The catalytic activity and reusability of g-C3N4@PAN for PEC removal of DCF were validated by operating up to 5 cycles in batch conditions without losing efficiency, and then confirmed by operating the PEC system under continuous flow mode. All results remark the great potential of the developed PEC system with a g-C3N4@PAN structure as a supported catalyst to work efficiently in different modes of operation.

Novel 3D electro-Fenton reactor based on a catalytic packed bed reactor of perovskite/carbon microelectrodes for the removal of carbamazepine in wastewater

Highly Efficient Electrochemical Oxidation of Carbamazepine Using a Novel Graphene Nanoplatelet-doped PbO2 Electrode: Characteristics, Efficiency, and Mechanism

Reactive electrochemical ceramic membrane filtration system for efficient treatment of enrofloxacin from wastewater: Mechanisms and applications

Degradation and Mineralization of Carbamazepine Using an Electro-Fenton Reaction Catalyzed by Magnetite Nanoparticles Fixed on an Electrocatalytic Carbon Fiber Textile Cathode

Electrochemical removal of carbamazepine in water with Ti/PbO2 cylindrical mesh anode

Energy-efficient removal of carbamazepine in solution by electrocoagulation-electrofenton using a novel P-rGO cathode

Development of a three-dimensional electro-Fenton system packed with C-PTFE/Fe–Co–C hybrid particle electrodes for simultaneous H2O2 generation and activation into •OH

CuFeS2/GAC particle combined with electrochemical activation of persulfates for efficient degradation of carbamazepine

Effective degradation of carbamazepine using a novel electro-peroxone process involving simultaneous electrochemical generation of ozone and hydrogen peroxide

Single Iron Atoms Embedded in Mof-Derived Nitrogen-Doped Carbon as an Efficient Heterogeneous Electro-Fenton Catalyst for Degradation of Carbamazepine Over a Wide Ph

FeS2/carbon felt as an efficient electro-Fenton cathode for carbamazepine degradation and detoxification: In-depth discussion of reaction contribution and empirical kinetic model

Rapid Degradation of Carbamazepine in Wastewater Using Dielectric Barrier Discharge-Assisted Fe3+/Sodium Sulfite Oxidation

Efficient Degradation of Carbamazepine Using a Modified Nickel-Foam Cathode (Ni-Fm/cnts) in Penetrating Electro-Fenton Process

Three-Dimensional Electro-Fenton Degradation of Ciprofloxacin Catalyzed by Cuo Doped Red Mud Particle Electrodes: Influencing Factors, Possible Degradation Pathways and Energy Consumption

Treatment of phenolic compound wastewater using CuFe<sub>2</sub>O<sub>4</sub>/Al<sub>2</sub>O<sub>3</sub> particle electrodes in a three-dimensional electrochemical oxidation system

The Efficient Degradation of Carbamazepine by Cu-Fe Bimetallic Composite Carbon Derived from the Waste Cation Exchange Resins: Mechanism, Ecotoxicity, and Continuous Flow Catalysis

Optimisation of a photoelectrochemical system for the removal of pharmaceuticals in water using graphitic carbon nitride

Highly efficient and robust iridium based anodes prepared via thermal decomposition for significant degradation of carbamazepine

Development of a three-dimensional photoelectrocatalytic reactor packed with granular sludge carbon photoelectrocatalyst for efficient wastewater treatment

Effective mineralization of anti-epilepsy drug carbamazepine in aqueous solution by simultaneously electro-generated H2O2/O3 process

Enhanced Treatment of Pharmaceutical Wastewater by Combining Three-Dimensional Electrochemical Process with Ozonation to in Situ Regenerate Granular Activated Carbon Particle Electrodes