Abstract:The ionomer distribution in the catalyst layer (CL) of proton exchange membrane fuel cell (PEMFC) has become a vital research topic, especially under the low Pt loading condition. In the drying process, the ionomers adsorbed on Pt/C particles in the catalyst ink (called adsorbed ionomers) evolve into a thin ionomer coating on catalyst particles, while free ionomers in the catalyst ink randomly deposit to form ionomer bridges (called deposited ionomers). Many studies have reported the structure and regulation of adsorbed ionomers, but little is known about deposited ionomers which are also important for the formation of CL structure. In this work, a two-pronged CL preparation method is innovatively proposed to achieve independent regulation of the deposited ionomer formed by free ionomers in the catalyst ink, and the effects of different deposited ionomer structures on CL microstructure and fuel cell performance are investigated. Furthermore, the two-pronged method is compared with the conventional method to discuss its feasibility in optimizing the CL structure. The results indicate that the characteristics of free ionomer in the catalyst ink will affect the ionomer distribution and pore structure in the CL by controlling the deposited ionomer, thus determining proton conduction and mass transport. The uniform deposited ionomer morphology and short-side-chain (SSC) ionomer structure make the ionomer distribution in the CL uniform, which promotes proton conduction but also results in high mass transport resistance. Compared with the conventional method, the proton conduction resistance of the electrode prepared by the two-pronged method is decreased by 48.3%, the thickness of ionomer film on catalyst particles surface is decreased by about 2 nm, and the power density of the single cell is increased by 40.4% at the current density of 2500 mA cm −2 . These findings provide new insights into the independent regulation of each component in the catalyst ink and the structural optimization of CL.

Manipulating agglomerate morphology in catalyst slurries: Insights into the synergistic effect of multiple parameters

Reshaping the Cathodic Catalyst Layer for Anion Exchange Membrane Fuel Cells: from Heterogeneous Catalysis to Homogeneous Catalysis

Effect of rheological properties of catalyst slurry on the structure of catalyst layer in PEMFC

Effects of agglomerate structure and operating humidity on the catalyst layer performance of PEM fuel cells

Effects of Electrostatic Force and Network Structure on the Stability of Proton-Exchange Membrane Fuel Cell Catalyst Ink.

Effects of carbon aggregates and ionomer distribution on the performance of PEM fuel cell catalyst layer: A pore-scale study

Effect of catalyst ink particle size on the structure of the catalyst layer and electrical performance in the process of ultrasonic spray manufacturing PEMFCs

Effects of solvent composition on agglomerate structure in catalyst ink for polymer electrolyte fuel cells

Independent regulation of ionomer distribution in catalyst layer for proton exchange membrane fuel cell

Microscale structure optimization of catalyst layer for comprehensive performance enhancement in proton exchange membrane fuel cell

A new insight into the effects of agglomerate parameters on internal dynamics of proton exchange membrane fuel cell by an advanced impedance dimension model

Ionomer Distribution Control for Improving the Performance of Proton Exchange Membrane Fuel Cells: Insights into Structure–property Relationships

Optimizing catalyst layer structure design for improved water management of anion exchange membrane fuel cells

Agglomerate Engineering to Boost PEM Water Electrolyzer Performance (Adv. Energy Mater. 41/2024)

The Effect of Catalyst Layer Design on Catalyst Utilization in PEMFC Studied Via Stochastic Reconstruction Method

Construction of catalyst layer network structure for proton exchange membrane fuel cell derived from polymeric dispersion

Optimizing design of catalyst layer structure with carbon-supported platinum weight ratio mixing method for proton exchange membrane fuel cells

Hierarchical catalyst layer structure for enhancing local oxygen transport in low Pt proton exchange membrane fuel cells

Modelling the Reactive Transport Processes in Different Reconstructed Agglomerates of a PEFC Catalyst Layer

Layer-by-Layer Polydimethylsiloxane Modification Using a Two-Nozzle Spray Process for High Durability of the Cathode Catalyst in Proton-Exchange Membrane Fuel Cells

The Formation–Structure–Functionality Relationship of Catalyst Layers in Proton Exchange Membrane Fuel Cells