Abstract:The weight of the primary mirror increases as the aperture of ground-based telescopes increases, making it more challenging to maintain the positional stability and surface accuracy of the solid primary mirror. Consequently, a 2 m lightweight silicon carbide (SiC) mirror and an optimization method were proposed in this study. The relationship between the gravitational deformation of the mirror and its thickness and number of supports was derived based on force analysis of the mirror; the thickness of the mirror and the appropriate number of supports were obtained as initial parameters for optimization. The back structure of the mirror was designed in a lotus pattern to improve its rigidity. Numerous structural parameters were classified into major and non-major parameters based on the results of a sensitivity analysis. The non-major and major structural parameters were optimized using a Latin hypercube design method and a non-dominated sorting genetic algorithm, respectively. The optimized 2 m lightweight SiC mirror had a mass of 119 kg and an areal density of 38.7 kg/m2. The surface figure error root-mean-square (RMS) in the vertical state of the optical axis and the first modal resonance of the mirror assembly calculated using finite element analysis were 11.3 nm and 76.5 Hz, respectively. Modal tests of the mirror assembly were conducted using the hammering method, achieving a maximum relative frequency error of 7.4% compared with the simulation results. The optimized 2 m SiC mirror was over 50% lighter than traditional passive Zerodur mirrors of the same size.

Design and analysis of three-dimensional compliant structure suitable for integrated design of support and drive of space optical mirror

Research on integrated design method of high-precision space-based active optical large-caliber splicing mirror drive and support

Kinematic Analysis and Model Fabrication of a Space Deployable Optical Baffle

The flexible optical manufacturing technologies for large aspheric mirror

An Overview of Radial Supporting Ways for Large-Size Movement Mirror: a Case Study of a Large-Aperture Rotating Prism

Analysis and Optimization of a Novel Laterally Deformable Optical NEMS Grating Transducer

MODIFIED DESIGN AND STRUCTURAL ANALYSIS FOR ADJUSTMENT MECHANISM OF THE IMAGING LENS'S FOCAL LENGTH OF A SPACE SOLAR TELESCOPE

Design of biaxial flexural mount for a rectangular mirror with large aspect ratio of a space telescope

Design And Analysis Of Structure Of Large Aperture Three-Mirror Off-Axis Optical System

Flexible support structure based on spring principle for a high precision reflecting mirror

Design, modeling, analysis and testing of a novel piezo-actuated XY compliant mechanism for large workspace nano-positioning

Analysis and design of spatial compliant mechanisms using a 3-D dynamic stiffness model

The Design Of Support Structure Of Mirror Subassembly Of Space Remote Sensor

Flexible support structure design for optical mirror

Design and optimization of integrated flexure mounts for unloading lateral gravity of a lightweight mirror for space application

Design of a Focusing Mechanism Actuated by Piezoelectric Ceramics for TMA Telescope

Ability to modulate walking cadence remains intact in Parkinson's disease.

The Optimization Design of a Lightweight 2 m SiC Mirror for Ground-Based Telescopes

Optomechanical analysis of the mounting performance of large laser transport mirrors

Design and Analysis of the Optical Structure for K Mirror in Astronomical Telescopes

Low-Stress Mounting Configuration Design for Large Aperture Laser Transmission Mirror