Model test and numerical simulation of a new prefabricated double-row piles retaining system in silty clay ground

Ruisong Wang,Hao Yang,Pengpeng Ni,Chenyang Zhao,Chengchao Guo,Huihuan Ma,Pu Dong,Huqing Liang,Mengxiong Tang

DOI: https://doi.org/10.1016/j.undsp.2023.05.004

IF: 5.327

2023-06-01

Underground Space

Abstract:This paper introduces a new prefabricated recyclable double-row piles retaining system for excavations in silty clay ground. Laboratory model test and numerical simulation are conducted to study the system behavior upon excavation. The horizontal displacement ( δ h ), Von Mises stress ( σ M ), strain ( ε ), ground surface settlement ( δ v ), and earth pressure are systematically investigated. Furthermore, the monitoring data of 13 excavation cases supported by double-row piles retaining system are presented and discussed. The experimental results can basically match the numerical results, and the maximum σ M , maximum bending moment ( M m a x ), maximum horizontal displacement ( δ h m ) of structural members are all less than the tolerance limits. The ground surface settlement model of double-row piles retaining system consists of three zones, i.e., rebound influence zone, primary influence zone and secondary influence zone. The δ h m values are 0.07%–1.42% of the excavation depth (H e). The maximum ground surface settlement ( δ v m ) is generally less than δ h m . The ratio of δ v m / δ h m varies between 0.09 and 0.76, with an average value of 0.5. The observed earth pressure on the retained side of front pile (p af) is about 0.53–0.57 γ H below the excavation surface. Above the excavation surface, p af decreases dramatically when getting closer to the ground surface.

engineering, civil