Abstract:Aqueous zinc ion batteries (AZIBs) represent a promising technology for grid‐scale energy storage due to their innate safety, low cost, and environmental friendliness. However, planar Zn foil intrinsically suffers from limited ion and electron transport pathways, poor wettability, and surface passivation, preventing the homogenous deposition of metallic Zn and poor durability of AZIBs. Herein, a 3D Zn foil with hierarchical porous architecture is developed through a facile non‐aqueous organic acid etching strategy. The 3D Zn anode is pore‐rich and cavity‐rich, leading to significantly enhanced accessibility to aqueous electrolytes. Accordingly, this 3D Zn anode enables preferential plating of Zn in the porous texture with suppressed dendrite growth, as confirmed by ex situ scanning electron microscopy and finite element analysis. The cycle life of the 3D Zn anode is sustained over 930 and 1500 h at 4.0 mA cm−2‐2.0 mAh cm−2 and 1.0 mA cm−2‐1.0 mAh cm−2, respectively. Furthermore, the assembled 3D Zn and α‐MnO2 full batteries demonstrate a prolonged cycle life of 3000 cycles with improved rate performance. The etching strategy using non‐aqueous organic acid paves a new way to fabricate 3D metal anodes for Zn and other metal anode batteries. A non‐aqueous organic acid etching strategy is used to construct 3D hierarchical porous Zn foil, removing the surface passivation, providing multichannels for ion/electron transportation, and improving the surface wettability of Zn foil. Accordingly, the formed hierarchical porous Zn foil forms abundant nucleation sites and changes the electric‐field distribution, leading to a significantly prolonged cycle life and improved stability for the resulting zinc ion batteries.

Effect of Surface Treatment of Stainless Steel Foils in High‐Performance Aqueous Zinc‐Ion Battery

Perfluoro-1-butanesulfonic acid etching strategy for dendrite suppression in aqueous zinc metal batteries

Loosening Zinc Ions from Separator Boosts Stable Zn Plating/Striping Behavior for Aqueous Zinc Ion Batteries

Zincophilic and Low-Active Metallic Particles-Induced Alloying/dealloying Behavior for High-Performance Aqueous Zinc Metal Batteries

In situ zinc citrate on the surface of Zn anode improves the performance of aqueous zinc-ion batteries

Crystal Plane Reconstruction and Thin Protective Coatings Formation for Superior Stable Zn Anodes Cycling 1300 h

In situ Construction of Multifunctional Surface Coatings on Zinc Metal for Advanced Aqueous Zinc–Iodine Batteries

Constructing surface protective film of V-Se-O to promote zinc ion storage by surface oxygen implantation strategy

Construction of an Artificial Interfacial Layer with Porous Structure toward Stable Zinc‐Metal Anodes

The pitfalls of using stainless steel (SS) coin cells in aqueous zinc battery research

In-situ interfacial layer with ultrafine structure enabling zinc metal anodes at high areal capacity

γ-Al2O3 coating layer confining zinc dendrite growth for high stability aqueous rechargeable zinc-ion batteries

Modification of Zinc Anodes by In Situ ZnO Coating for High-Performance Aqueous Zinc-Ion Batteries

De‐Passivation and Surface Crystal Plane Reconstruction via Chemical Polishing for Highly Reversible Zinc Anodes

Carboxymethyl Chitosan‐Modified Zinc Anode for High‐Performance Zinc–Iodine Battery with Narrow Operating Voltage

Interfacial Zn Ion Capture and Desolvation Engineering for High-Performance Zn Metal Anode

An Industrially Applicable Passivation Strategy for Significantly Improving Cyclability of Zinc Metal Anodes in Aqueous Batteries

Organic Acid Etching Strategy for Dendrite Suppression in Aqueous Zinc‐Ion Batteries

Fluoride-Rich, Organic-Inorganic Gradient Interphase Enabled by Sacrificial Solvation Shells for Reversible Zinc Metal Batteries

Selectively Etching-off Highly Reactive (002) Zn Facet Enable Highly Efficient Aqueous Zinc-metal Batteries

The pitfall of using stainless steel (SS) coin cell in aqueous zinc battery research