Abstract:Yttria-stabilized zirconia (YSZ) has been extensively used as a thermal barrier coating (TBC) for high-temperature alloys. In this research, the microstructural attributes and thermal expansion behavior of an additively manufactured functionally graded composite (YSZ/IN718 FGC) were investigated. First, a powder mixture of IN718 and YSZ (ranging from 1 wt% to 4 wt%) was achieved via low-energy ball-milling at 100 rpm. Differential scanning calorimetry (DSC) analysis depicted the melting behaviour of the powder mixtures of different YSZ content. The endothermic peaks in the DSC curve, at ∼1360 °C, suggested that the energy needed to melt the powder mixture increases with increasing YSZ content. These varying powder compositions were used to fabricate FGC samples using L-PBF. The study investigated the effects of laser power variation along the YSZ gradient, successfully mitigating the fusion defects that had been initially observed in FGC samples. Microscopic analyses, comprising scanning electron microscopy (SEM) and transmission electron microscopy (TEM), depicted the elemental segregation of Nb and Mo at the solidification subgrain boundaries (SSBs). Furthermore, the electron backscattered diffraction (EBSD) results demonstrated the refinement of grains and a reduction in textural intensity, particularly along the YSZ gradient. Energy dispersive spectroscopy (EDS) and electron probe micro analysis (EPMA) were used to validate the uniform dispersion of YSZ particles throughout the composite matrix, with the EPMA line scan affirming a predominantly linear YSZ content variation. Lastly, the coefficients of thermal expansion (CTEs) were evaluated, both parallel and perpendicular to the build direction. A decrease of approximately ∼6 % in CTE was noted along the building or gradation direction. Notably, perpendicular to the building direction, the CTE values for specimens containing 4 wt% and 2 wt% YSZ witnessed significant reductions of ∼32 % and ∼12 %, respectively. This research significantly contributes to the understanding of the microstructural intricacies and thermal behavior of YSZ/IN718 FGC produced by L-PBF process.

Fabrication and characterization of functionally graded materials Ta10W-YSZ by SPS

A novel functionally graded material in the ZrB2–SiC and ZrO2 system by spark plasma sintering

Simulation and Study of Manufacturing of W–Cu Functionally Graded Materials by a Selective Laser Melting Process

Synthesis of Functionally Graded AA7075-B4C Composite with Multi-Level Gradient Structure

Fabrication and Mechanical Property of W-Y2O3 Composites and Graded material

Fabrication Of Sic/Cu Functionally Gradient Material By Graded Sintering

Fabrication and microstructure of W/Cu functionally graded material

Investigation of microstructure and thermal expansion behaviour of a functionally graded YSZ/IN718 composite produced by laser-powder bed fusion

Fabrication process of smooth functionally graded materials through a real-time inline control of the component ratio

Fabrication and Characterizations of Ysz Electrolyte Films for Sofc

Fabrication of Al2O3/TiC/Ni Functionally Graded Materials by Pulsed-Electric Current Sintering and Their Mechanical Properties.

Characterization of Interfacial Transition Zone of Functionally Graded Materials with Graded Composition from a Single Material in Electron Beam Powder Bed Fusion

Influence of Yttria content in YSZ: An evaluation of water-based SPS coatings and spark plasma sintered pellets

Fabrication and characterization of stainless steel 308 L / Inconel 625 functionally graded material with continuous change in composition by dual-wire arc additive manufacturing

Effect of composition gradient design on microstructure and mechanical properties of dual-wire plasma arc additively manufactured 316L/IN625 functionally graded materials

Thermal stress simulation in TiB2-Cu functionally graded materials

Fabrication of W–Cu Functionally Graded Material with Improved Mechanical Strength

Fabrication, Microstructure and Properties of A Ysz Electrolyte for Sofcs

Fabrication of ZrO2/Mo-Si/Ni Functionally Graded Material by Dip-Coating

Microstructure and Mechanical Properties of P21-STS316L Functionally Graded Material Manufactured by Direct Energy Deposition 3D Print