Abstract:This paper focuses on the study of current knowledge regarding the use of hydrogen as a reducing agent in the metallurgical processes of iron and steel production. This focus is driven by the need to introduce environmentally suitable energy sources and reducing agents in this sector. This theoretical study primarily examines laboratory research on the reduction of Fe-based, metal-bearing materials. The article presents a critical analysis of the reduction in iron oxides using hydrogen, highlighting the advantages and disadvantages of this method. Most experimental facilities worldwide employ their unique original methodologies, with techniques based on Thermogravimetric analysis (TGA) devices, fluidized beds, and reduction retorts being the most common. The analysis indicates that the mineralogical composition of the Fe ores used plays a crucial role in hydrogen reduction. Temperatures during hydrogen reduction typically range from 500 to 900 °C. The reaction rate and degree of reduction increase with higher temperatures, with the transformation of wüstite to iron being the slowest step. Furthermore, the analysis demonstrates that reduction of iron ore with hydrogen occurs more intensively and quickly than with carbon monoxide (CO) or a hydrogen/carbon monoxide (H2/CO) mixture in the temperature range of 500 °C to 900 °C. The study establishes that hydrogen is a superior reducing agent for iron oxides, offering rapid reduction kinetics and a higher degree of reduction compared to traditional carbon-based methods across a broad temperature range. These findings underscore hydrogen's potential to significantly reduce greenhouse gas emissions in the steel production industry, supporting a shift towards more sustainable manufacturing practices. However, the implementation of hydrogen as a primary reducing agent in industrial settings is constrained by current technological limitations and the need for substantial infrastructural developments to support large-scale hydrogen production and utilization.

Application of hydrogen in production of ferroalloys

Hydrogen technologies for decarbonization of ferrous metallurgy: scientific background and technical capabilities

Prospects for the development of hydrogen technologies in the domestic metallurgy

Development and progress on hydrogen metallurgy

Metals Production and Metal Oxides Reduction Using Hydrogen: A Review

Development of Ti–Zr–Mn–Cr-(V–Fe) Based Alloys for Hydrogen Feeding System in Hydrogen Metallurgy Application

Prospects for the Extensive Application of Hydrogen in Powder Metallurgy

The Direct Reduction of Iron Ore with Hydrogen

Hydrogen steelmaking. Part 1: Physical chemistry and process metallurgy

Synthesis of Copper–Nickel and Iron–Nickel Alloys by Hydrogen Reduction of Mixtures of Metal Oxide Powders

Hydrogen-Based Direct Reduction of Iron Oxides: A Review on the Influence of Impurities

Low-cost Vanadium-Free Ti–Zr–Cr–Mn–Fe Based Alloys for Metal Hydride Hydrogen Compressor under Mild Conditions

Hierarchical nature of hydrogen-based direct reduction of iron oxides

An Overview Analysis of Current Research Status in Iron Oxides Reduction by Hydrogen

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Production of hydrogen, active zerovalent iron and ferroferric oxide octahedron by alkaline etching Al–Fe alloys

Industrial application prospects and key issues of the pure-hydrogen reduction process

Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales

Assessment of the risks of using hydrogen instead of carbon-containing fuels in the ferrous metallurgy

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

Results of Hydrogen Reduction of Iron Ore Pellets at Different Temperatures