Abstract:Using discrete element method (DEM) modeling and near-infrared (NIR) spectroscopy, the feasibility of powder mixing in the initial pre-melting zones of a twin screw extruder using two independent feeders was studied. Previous work in the pharmaceutical and food industry has focused on mixing when materials are melted or on material homogeneity at the extruder's output. Depending on the formulation, ensuring a fully blended formulation prior to melting may be desired. Experiments were conducted using a Coperion ZSK-18 extruder to evaluate if blend uniformity can be achieved by exploring screw configuration, screw speed, and powder feed rate. As powder exited the extruder and deposited on a conveyor belt, an in-line NIR spectrophotometer measured spectra of material. Chemometric-based models predicted unknown concentrations to evaluate if blend uniformity was achieved. Using the EDEM software, Hertz-Mindlin contact model, and dimensions of the extruder, DEM simulations complemented the experimental work. The DEM computational models provided understanding of mixing patterns inside the extruder at particle scale and helped select the screw configuration before doing experimentation. The simulations showed good axial mixing for all the screw configurations studied, while good cross (radial) mixing was only observed for the screw configuration with 90-degree kneading elements. Therefore, the screw configuration with two 90-degree kneading elements was chosen for the experimental study. The RTD profiles when using a screw configuration with only conveying screw elements are comparable to a plug flow reactor (PFR), while the profiles when using kneading elements are more comparable to an ideal continuous stirred tank reactor (CSTR). For the screw configuration with 90 degrees kneading elements, the mean residence time (MRT) decreases with an increase in the screw speed. Experimental NIR spectra showed that concentrations can be predicted with an error of 2%. It was demonstrated that the twin screw extruder can provide proper dry powder mixing of two powder feed streams based on a unit dose scale, enabling continuous powder mixing prior to the melting zone in the extruder for the formulation studied with a cohesive API. This setup may also work for other types of formulations. These studies can help in developing lean hot melt as well as wet extrusion/granulation processes using twin screw extruders for the continuous manufacturing of oral solid dosage products.

Application of Twin Screw Extrusion to Scale Polymorphs, a Salt, and the Amorphous Phase for Various Drug Substances

In-line measurement apparatus for residence time distribution in twin-screw extruder and its application in polymer processing

Formulation, Bioavailability, and Manufacturing Process Enhancement: Novel Applications of Melt Extrusion in Enabling Product Development

Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation—Where Are We Now?

Dry Amorphization of Itraconazole Using Mesoporous Silica and Twin-Screw Technology

An Advanced Twin-Screw Granulation Technology: The use of Non-Volatile Solvents with High Solubilizing Capacity

Computational Support to Explore Ternary Solid Dispersions of Challenging Drugs Using Coformer and Hydroxypropyl Cellulose

Synergistic application of twin-screw granulation and selective laser sintering 3D printing for the development of pharmaceutical dosage forms with enhanced dissolution rates and physical properties

An update on the contribution of hot-melt extrusion technology to novel drug delivery in the twenty-first century: part II

In Situ Eutectic Formation in a Polymeric Matrix via Hot-Melt Reactive Extrusion and the Use of Partial Least Squares Regression Modeling for Reaction Yield Determination

Engineering a New Access Route to Metastable Polymorphs with Electrical Confinement

Processing Thermoplastics Urethanes via Twin Screw Extrusion

Advances in Twin-Screw Granulation Processing

Novel Applications of Hot Melt Extrusion Technology

Polymorph selection of pharmaceutical cocrystals via bench-top and continuous production techniques

Small-Scale Continuous Drug Product Manufacturing using Dropwise Additive Manufacturing and Three Phase Settling for Integration with Upstream Drug Substance Production

A Retrospective Analysis of Polymer Selection Using Solvent Casting: Formulation and DoE Optimization of the Amorphous Solid Dispersion of Amoxicillin Trihydrate by a Spray Drying Method

Cocrystalization and simultaneous agglomeration using hot melt extrusion

Navigating the Solution to Drug Formulation Problems at Research and Development Stages by Amorphous Solid Dispersion Technology

An innovative carrier for the formulation of amorphous solid dispersion by hot-melt extrusion with no further downstream processes: a case study with indomethacin.

Dry Powder Mixing Is Feasible in Continuous Twin Screw Extruder: Towards Lean Extrusion Process for Oral Solid Dosage Manufacturing