Abstract:The effectiveness of Carbon Fiber Reinforced Polymer (CFRP) seismic-retrofit of circular Reinforced Concrete (RC) bridge piers under vehicular lateral impact loading is addressed in the present work performing experimental tests. Sixteen 1/3 scale RC bridge piers with circular cross-sections characterized by three different configurations of longitudinal and transverse reinforcements were tested with and without CFRP seismic-retrofit. In the first case, tested columns represent common shear-deficient RC bridge piers designed with obsolete design practice or for non-seismic areas. In the second case, CFRP wrapping is applied according to common seismicretrofit practices to increase the shear capacity and ductility of columns. Experimental tests were carried out under static and lateral impact loading with propped cantilever conditions reproducing a typical short-span viaduct bridge pier configuration. In the static tests, the lateral load was applied monotonically through a hydraulic jacket under equivalent impact conditions. In impact tests, the lateral impact load was applied through a colliding truck equipped with a rigid hammer at the typical vehicular impact location adopting two different impact velocities (3 and 4.5 m/s). A critical investigation of the transient dynamic characteristics, damage evolution, and post-impact damage is conducted by comparing the results obtained with and without CFRP seismic-retrofit, and under static and dynamic loading conditions. It is shown that CFRP seismic-retrofitting of circular RC bridge pier can also be effective in reducing the vulnerability under lateral impact loading. The CFRP-retrofit approach adopted in this study meets the requirement of multi-hazard prevention improving the robustness of the bridge. Finally, a semi-empirical equation for predicting the maximum displacement under impact loading is derived based on experimental results. The proposed equation adopts the results of a static test as a proxy for assessing the dynamic behavior allowing for the design of the required shear and flexural load-carrying capacity.

Combination rule for the prediction of the seismic demand on columns of regular bridges under bidirectional earthquake components

Analytical Calculation Method of Seismic Resistant Response for Posttensioned Precast Bridge Piers

Cyclic Testing of Large-Scale Rectangular Bridge Columns under Bidirectional Earthquake Components

Effectiveness of CFRP Seismic-Retrofit of Circular RC Bridge Piers under Vehicular Lateral Impact Loading

Improved bridge capacity rating methods based on system reliability assessment

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Seismic evaluation of reinforced concrete bridges using capacity‐based inelastic displacement spectra

Assessment of bridge vulnerability due to seismic excitations considering wave passage effects

Probabilistic seismic demand of typical highway bridges in moderate-intensity zones

Simplified calculation modeling method of multi-span bridges on high-speed railways under earthquake condition

Simplified calculation models for evaluating the post-earthquake axial load-carrying capacity of RC bridge piers

The strain demand of reinforced concrete bridge columns under seismic loading

Probabilistic Seismic Vulnerability and Loss Assessment of a Seismic Resistance Bridge System with Post-Tensioning Precast Segmental Ultra-High Performance Concrete Bridge Columns

Modified Elastic Dynamic Analysis (EDA) for Seismic Demand on In-Span Hinge Shear Keys in Multi-Frame Bridges

Study on the dynamic response correction factor of a coupled high-speed train–track–bridge system under near-fault earthquakes

Response Modification Factor For Y-Eccentric-Braced Steel Frame Structures

Behavior of Composite Rigid Frame Bridge under Bi-Directional Seismic Excitations

Effect of Multi-Story Brace Distribution on Seismic Performance of RC Tall Bridge Bents Retrofitted with Buckling Restrained Braces

Shake table tests and numerical studies on buckling-restrained braces as a seismic resilient measure for reinforced concrete twin-column tall bents

Modified spectral format based on probability level using site-specific uniform hazard spectrum

Sensitivity of seismic response of pile-supported, multi-span viaduct bridges to interaction between soil-foundation and structural parameters