Abstract:The demand for high-energy-density lithium batteries (LBs) that work under a wide temperature range (−40 to 60 °C) has been increasing recently. However, the conventional lithium hexafluorophosphate (LiPF6)-based ester electrolyte with a solvent-based solvation structure has limited the practical application of LBs under extreme temperature conditions. In this work, a novel localized high-concentration electrolyte (LHCE) system is designed to achieve the anion-containing solvation structure with less free solvent molecules using lithium difluorophosphate (LiPO2F2) as a lithium salt, which enables wide-temperature electrolyte for LBs. The optimized solvation structure contributes to the cathode–electrolyte interface (CEI) with abundant LiF and P–O components on the surface of the LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode, effectively inhibiting the decomposition of electrolyte and the dissolution of transition-metal ions (TMIs). Moreover, the weakened Li+–dipole interaction is also beneficial to the desolvation process. Therefore, the 4.3 V Li||NCM523 cell using the modified electrolyte maintains a high capacity retention of 81.0% after 200 cycles under 60 °C. Meanwhile, a considerable capacity of 70.9 mAh g–1 (42.0% of that at room temperature) can be released at an extremely low temperature of −60 °C. This modified electrolyte dramatically enhances the electrochemical stability of NCM523 cells by regulating the solvation structure, providing guidelines for designing a multifunctional electrolyte that works under a wide temperature range.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c02221.LSV, ion conductivity, and viscosity tests of different electrolytes under 25 °C; details of the theoretical calculation; electrochemical performance of 4.3 V Li||NCM523 cell in different HCEs (25 °C and 60 °C); CV of the Li||NCM523 battery in two electrolytes; SEM, XPS, and EDS characterizations of electrodes cycled under 4.3V (60 °C); SEM, XPS, and EDS characterizations of electrodes cycled under 4.5V (25 °C); and performance of Li||Cu half-cells in 301, 1.4M LG, and 1.4M LGH* electrolyte (25 °C) (PDF)This article has not yet been cited by other publications.

Exceptional Performance of Li-ion Battery Cells with Liquid Electrolyte at 100°C

Towards Li-Ion Batteries Operating at 80 °C: Ionic Liquid Versus Conventional Liquid Electrolytes

A Lithium Metal Anode Surviving Battery Cycling above 200 °C.

High‐Performance Lithium Solid‐State Batteries Operating at Elevated Temperature

A Fluorinated Ether Co-solvent Enables High Operating Temperature Li-ion Batteries

High‐Voltage Li‐Ion Full‐Cells with Ultralong Term Cycle Life at Elevated Temperature

Improving cyclability of Li metal batteries at elevated temperatures and its origin revealed by cryo-electron microscopy

Interface Engineering via Manipulating Solvation Chemistry for Liquid Lithium‐Ion Batteries Operated ≥ 100 °C

High Voltage Stable Li Metal Batteries Enabled by Ether-Based Highly Concentrated Electrolytes at Elevated Temperatures

Safe Hybrid Electrolytes Based on Ionic Liquid and Carbonate Solvents for High-Temperature Li-rich Lithium-Ion Battery

Alkyl Dicarbonates, Common Electrolyte Degradation Products, Can Enable Long-Lived Li-Ion Cells at High Temperatures

Anion-Containing Solvation Structure Reconfiguration Enables Wide-Temperature Electrolyte for High-Energy-Density Lithium-Metal Batteries

Ionic Liquid-Based Electrolyte Membranes for Medium-High Temperature Lithium Polymer Batteries

Ionic Liquid-Organic Carbonate Electrolyte Blends To Stabilize Silicon Electrodes for Extending Lithium Ion Battery Operability to 100 °C

Double-salt electrolyte for Li-ion batteries operated at elevated temperatures

Stable High‐Temperature Lithium‐Metal Batteries Enabled by Strong Multiple Ion–Dipole Interactions

A Single-Ion Gel Polymer Electrolyte System for Improving Cycle Performance of LiMn2O4 Battery at Elevated Temperatures

A High‐Energy Long‐Cycling Solid‐State Lithium‐Metal Battery Operating at High Temperatures

Engineering an Insoluble Cathode Electrolyte Interphase Enabling High Performance NCM811//Graphite Pouch Cell at 60 °C

Amide-Modulated Gel Electrolytes Enable Nickel-Rich Cathodes with Enhanced Interphase Stability at 90 °C

Deciphering Interphase Instability of Lithium Metal Batteries with Localized High-Concentration Electrolytes at Elevated Temperatures