Abstract:Deterioration of concrete infrastructures occurs for several reasons, leading to operational problems and further collapse. Freezing-thawing processes are one of the active damage mechanisms in cold regions causing defect accumulation in the inner structure of the material and reduction of the mechanical properties. The optimal way to evaluate the damage degree is by applying non-destructive testing (NDT) methods which allow detailed and integrated results. In this research, a relationship between Acoustic Emission (AE) release energy trend and X-ray Computed Tomography (CT) parameters was investigated for damage quantification. Visualization and extraction of the internal concrete components were conducted by X-ray CT. The ultrasonic pulse velocity (UPV) and resonant frequency methods were employed for the determination of the dynamic modulus of elasticity. After utilizing AE on the compression test, the damage characterization was evaluated. The extensive description of structural members in in-service structure was acquired using principal component analysis (PCA). The X-ray CT results show that all specimens have initial damage degrees in form of cracks and voids unevenly distributed within the concrete matrix. Regarding the irrigation structure, all concrete specimens have unique particle characteristics depending on which structural members they were drilled out from. Moreover, it is observed that the accumulated damage in the form of voids positively correlates with the initial AE energy release rate. In concrete specimens with low damage degrees, the AE energy release has an upward trend of low amplitude (≤50 dB) with a silent stage at the initial loading and sudden release only near the final failure. In contrast, heavily damaged concrete shows continuous AE energy release of high amplitude (≥60 dB) and with a high initial AE energy release rate corresponding to the uninterrupted crack propagation and coalescence in the early stage of fracture and throughout the loading due to the high weak zones ratio. These results indicate that frost damage can be evaluated by the comprehensive analysis of the fracture process of concrete based on X-ray CT and AE results to characterize the damage degree.

Method for prediction of the frost resistance ability of air‐entrained concrete based on the 3D air void characteristics by x‐ray micro‐CT

RBSM-based Mesoscale Study of Frost Deterioration for Recycled Concrete Considering Air-Entrainment in Old and New Mortar

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Characterizations and Quantification of Freeze-Thaw Behaviors of Recycled Brick Aggregate Concrete

Environmental Factors Influencing The Durability Of Concrete Structures In Frost Environments

Two‐dimensional Rigid Body Spring Method Based Micro‐mesoscale Study of Mechanical Strengthening/damaging Effects to Concrete by Frost Action

Experimental Examination of Electrical Characteristics for Portland Cement Mortar Frost Damage Evaluation

Service Life Prediction of Concrete with Combined Air-Entraining Admixture and Fibers under Freeze–Thaw Cycles Based on Critical Water Saturation Theory

Influence of air-entraining agent and freeze-thaw action on pore structure in high-strength concrete by using CT-Scan technology

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Evaluation of freeze-thaw damage on concrete material and prestressed concrete specimens

Impact of Self-Compacting Concrete Admixtures on Frost Resistance and Compressive Strength-Commensurability of Frost Resistance Criteria

Characterizing Frost Damages of Concrete with Flatbed Scanner

Experimental Investigation of the Deformational Behavior of the Interfacial Transition Zone (itz) in Concrete During Freezing and Thawing Cycles

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Advancing Concrete Durability Research through X-ray Computed Tomography

RBSM based analysis on mechanical degradation of non-air entrained concrete under frost action – A general prediction with various water cement ratio, lowest temperatures and FTC numbers

Prediction of Progressive Frost Damage Development of Concrete Using Machine-Learning Algorithms

Frost damage evaluation of concrete irrigation structure by X-ray CT and AE energy release trend at the initial loading stage

Both Plasticizing and Air-Entraining Effect on Cement-Based Material Porosity and Durability

Change of Mechanical Properties of Repair Mortars after Frost Resistance Rests