Abstract:The detailed compositional characterization of plastic waste pyrolysis oil was performed with comprehensive two-dimensional GC (GC×GC) coupled to four different detectors: a flame ionization detector (FID), a sulfur chemiluminescence detector (SCD), a nitrogen chemiluminescence detector (NCD) and a time of flight mass spectrometer (TOF-MS). The performances of different column combinations were assessed in normal i.e. apolar/mid-polar and reversed configurations for the GC×GC-NCD and GC×GC-SCD analyses. The information obtained from the four detectors and the use of internal standards, i.e. 3-chlorothiophene for the FID and the SCD and 2-chloropyridine for the NCD analysis, enabled the identification and quantification of the pyrolysis oil in terms of both group type and carbon number: hydrocarbon groups (n-paraffins, iso-paraffins, olefins and naphthenes, monoaromatics, naphthenoaromatics, diaromatics, naphthenodiaromatics, triaromatics, naphthenotriaromatics and tetra-aromatics), nitrogen (nitriles, pyridines, quinolines, indole, caprolactam, etc.), sulfur (thiols/sulfides, thiophenes/disulfides, benzothiophenes, dibenzothiophenes, etc.) and oxygen containing compounds (ketones, phenols, aldehydes, ethers, etc.). Quantification of trace impurities is illustrated for indole and caprolactam. The analyzed pyrolysis oil included a significant amount of nitrogen containing compounds (6.4wt%) and to a lesser extent sulfur containing compounds (0.6wt%). These nitrogen and sulfur containing compounds described approximately 80% of the total peak volume for respectively the NCD and SCD analysis. TOF-MS indicated the presence of the oxygen containing compounds. However only a part of the oxygen containing compounds (2.5wt%) was identified because of their low concentrations and possible overlap with the complex hydrocarbon matrix as no selective detector or preparative separation for oxygen compounds was used.

A comparative study of aromatic content in pyrolysis oils from waste plastics and tires: Assessing common refinery methods

Study on Purification of Pyrolytic Oil Derived from Pilot-scale Pyrolysis of Waste Tires in Multilevel Reactor

Pyrolysis Oils from Used Tires and Plastic Waste: A Comparison of a Co-Processing with Atmospheric Gas Oil

Quantitative determination of olefins in pyrolysis oils from waste plastics and tires using selective adsorption by Ag-SiO2 followed by GC×GC-FID

Recycling of Wastes Plastics and Tires from Automotive Industry

Advanced Chemical Characterization of Pyrolysis Oils from Landfill Waste, Recycled Plastics, and Forestry Residue

A Preliminary Study on the Use of Highly Aromatic Pyrolysis Oils Coming from Plastic Waste as Alternative Liquid Fuels

Comparative Study on the Synergistic Co-Pyrolysis of Plastics and Rubber Waste: Thermal Behavior and Product Distributions

Comparative Analysis of Fuels Derived from PE Plastic Waste with a Mixture of Plastic Recycling Waste of Codes: 1, 2, 4, 5, 6 and 7 Based on Low-Temperature Pyrolysis

Quantification of the composition of pyrolysis oils of complex plastic waste by gas chromatography coupled with mass spectrometer detector

Experimental investigation on slow thermal pyrolysis of real-world plastic wastes in a fixed bed reactor to obtain aromatic rich fuel grade liquid oil

Unravelling Potential Reaction Intermediates during Catalytic Pyrolysis of Polypropylene with Microscopy and Spectroscopy

Thermal pyrolysis of waste versus virgin polyolefin feedstocks: The role of pressure, temperature and waste composition

Sustainable production of aromatics via catalytic pyrolysis of polyolefins towards the carbon cycle for plastics

A comprehensive experimental investigation of plastic waste pyrolysis oil quality and its dependence on the plastic waste composition

Co-pyrolysis of various plastic waste components as an environmentally sustainable source of alternative fuels

Analysis and Control of Products Obtained From Pyrolysis of Polypropylene Using A Reflux Semi-batch Reactor and GC-MS/FID and FT-ICR MS

Gasoline like fuel from plastic waste pyrolysis and hydrotreatment

Detailed compositional characterization of plastic waste pyrolysis oil by comprehensive two-dimensional gas-chromatography coupled to multiple detectors

Investigation of gasoline-like transportation fuel obtained by plastic waste pyrolysis and distillation

Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons