Quantification of the composition of pyrolysis oils of complex plastic waste by gas chromatography coupled with mass spectrometer detector

A. Serras-Malillos,B. B. Perez-Martinez,A. Iriondo,E. Acha,A. Lopez-Urionabarrenechea,B. M. Caballero
DOI: https://doi.org/10.1039/d4ra00226a
IF: 4.036
2024-03-27
RSC Advances
Abstract:Waste valorisation through pyrolysis generates solid, liquid and gaseous fractions that need to be deeply characterised in order to try to recover secondary raw materials or chemicals. Depending on the waste and the process conditions, the liquid fraction obtained (so-called pyrolysis oil) can be very complex. This work proposes a method to quantitatively measure the composition of pyrolysis oils coming from three types of polymeric waste: (1) plastic packaging from sorting plants of municipal solid waste, (2) plastic rich fractions rejected from sorting plants of waste of electrical and electronic equipment and (3) end-of-life carbon/glass fibre reinforced thermoset polymers. The proposed methodology uses a gas chromatography (GC) coupled with mass spectrometer detector (MS) analytical technique, a certified saturated alkanes' mix, an internal standard and fourteen model compounds. Validation of the methodology concluded that the average relative error was between −59 wt% and +62 wt% (with standard deviations between 0 wt% and 13 wt%). Considering that the state-of-the-art scenario to quantify complex plastic pyrolysis oils as a whole is almost none and that they are usually evaluated only qualitatively based on the area percentage of the GC-MS chromatograms, the presented quantification methodology implies a clear step forward towards complex pyrolysis oil compositional quantification in a cost-effective way. Besides, this quantification methodology enables determining what proportion is being detected by GC-MS with respect to the total oil. Finally, the presented work includes all the Kováts RI for complex temperature-program gas chromatography of all the signals identified in the analysed pyrolysis oils, to be readily available to other researchers towards the identification of chemical compounds in their studies.
chemistry, multidisciplinary
What problem does this paper attempt to address?
The problem this paper attempts to address is the development of a method to quantitatively measure the composition of pyrolysis oil derived from complex plastic waste. Specifically, the authors propose a method using Gas Chromatography-Mass Spectrometry (GC-MS) technology to quantitatively analyze the composition of pyrolysis oil from three different types of polymer waste: 1. **Plastic packaging from municipal solid waste sorting plants**. 2. **Rejected plastic-rich mixtures from waste electrical and electronic equipment treatment plants**. 3. **Waste carbon/glass fiber reinforced thermoset polymers**. Currently, there are almost no methods for the overall quantification of complex plastic pyrolysis oil, typically relying only on qualitative assessments based on the area percentage of GC-MS chromatograms. Therefore, this study proposes a new quantification method that can quantitatively analyze the components of complex pyrolysis oil in a cost-effective manner and determine the proportion of oil detected by GC-MS. Additionally, this work provides the Kováts retention indices for all identified signals, allowing other researchers to identify chemicals in their studies.