Self‐Structural Healing of Encapsulated Perovskite Microcrystals for Improved Optical and Thermal Stability

Ruxue Li,Bobo Li,Xuan Fang,Dengkui Wang,Yueqing Shi,Xiu Liu,Rui Chen,Zhipeng Wei

DOI: https://doi.org/10.1002/adma.202100466

IF: 29.4

2021-03-31

Advanced Materials

Abstract:Perovskite materials and their optoelectronic devices have attracted intensive attentions in recent years. However, it is difficult to further improve the performance of perovskite devices due to the poor stability and the intrinsic deep level trap states (DLTS), which are caused by surface dangling bonds and grain boundaries. Herein, the CH₃ NH₃ PbBr₃ perovskite microcrystal is encapsulated by a dense Al₂ O₃ layer to form a microenvironment. Through optical measurement, it is found that the structure of perovskite can be healed by itself even under high temperature and long-time laser illumination. The DLTS density decreases nearly an order of magnitude, which results in 4-14 times enhancement of light emission. The observation is ascribed to the micron-level environment, which serves as a self-sufficient high-vacuum growth chamber, where the components of the perovskite are completely retained when sublimated and the decomposed atoms can re-arrange after thermal treatment. The modified structure showing high thermal stability is able to maintain excellent optical and lasing stability up to 2 years. This discovery provides a new idea and perspective for improving the stability of perovskite and can be of practical interest for perovskite device application.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the stability issue of perovskite materials in optoelectronic device applications. Specifically, although perovskite materials are regarded as one of the most promising semiconductor materials in the optoelectronics field due to their excellent optoelectronic properties (such as long charge diffusion length, high carrier mobility, high optical absorption coefficient, high gain coefficient and tunable direct bandgap), their poor stability severely restricts their commercial applications. For example, the threshold of perovskite lasers can be as low as \(10 \, \mu\text{J} \, \text{cm}^{-2}\), but the service life is only several tens of minutes; although perovskite LEDs have achieved an external quantum efficiency of over 20%, at an operating temperature of 60 to 100°C, due to phase change and low decomposition temperature (about 85°C), it is very unfavorable for perovskite materials. In addition, the stability of perovskite materials is also affected by illumination, humidity (water vapor) and atmosphere (oxygen).

In order to improve the stability of perovskite materials and their devices, researchers have tried various methods, such as optimizing deposition techniques, adjusting components and surface modification. However, these methods often require atomic - level adjustments, are difficult to control and have high costs. Currently, most surface modification strategies for improving perovskite stability are mainly simple external coating isolation, but this cannot fundamentally solve the problem.

This paper proposes a new method. By using atomic layer deposition (ALD) technology to encapsulate a dense Al\(_2\)O\(_3\) layer on CH\(_3\)NH\(_3\)PbBr\(_3\) (MAPbBr\(_3\) ) perovskite microcrystals, a micro - environment is formed. It is found that in this micro - environment, the perovskite structure can self - repair even under high temperature and long - time laser irradiation. By reducing the deep - level trap state (DLTS) density by nearly an order of magnitude, the light emission intensity is increased by 4 - 14 times. After heat treatment, the modified perovskite structure shows high thermal stability and can maintain excellent optical and laser stability within two years. This finding provides new ideas and perspectives for improving the stability of perovskite materials and has practical application value.