Abstract:During thermal runaway (TR), lithium-ion batteries (LIBs) produce a large amount of gas, which can cause unimaginable disasters in electric vehicles and electrochemical energy storage systems when the batteries fail and subsequently combust or explode. Therefore, to systematically analyze the post-thermal runaway characteristics of commonly used LIBs with LiFePO4 (LFP) and LiNixCoyMnzO2 (NCM) cathode materials and to maximize the in situ gas generation during battery thermal runaway, we designed experiments using an adiabatic explosion chamber (AEC) under an inert atmosphere to test LIBs. Additionally, we conducted in situ analysis of the gas components produced during thermal runaway. Our research findings indicate that after thermal runaway, NCM batteries produce more gas than LFP batteries. Based on battery gas production, the degree of harm caused by TR can be ranked as follows: NCM9 0.5 0.5 > NCM811 > NCM622 > NCM523 > LFP. The primary gas components during thermal runaway for both NCM and LFP batteries include H2,CO,CO2,C2H4, and CH4. The gas produced by LFP batteries contains a high proportion of H2. The high concentration of H2 results in a lower flammability limit (LFL) for the gas generated by LFP batteries during TR compared to the mixed gas produced by NCM batteries. Therefore, in terms of battery TR gas composition, the order of hazard level is LFP > NCM811 > NCM622 > NCM523 > NCM9 0.5 0.5 0.5. Although experimental results show that LFP batteries have superior thermal stability and lower gas production during large-scale battery thermal runaway events, considering gas generation composition and thermal runaway products, the thermal runaway risk of LFP batteries may be higher than that of NCM batteries. Although LFP batteries are considered very safe, our research results have once again drawn researchers' attention to LFP batteries. These gases can also serve as detection signals for battery thermal runaway warnings, providing a cautionary note for the future development of electrochemical energy storage and the renewable energy sector.

Thermal Runaway of Nonflammable Localized High‐Concentration Electrolytes for Practical LiNi0.8Mn0.1Co0.1O2|Graphite‐SiO Pouch Cells

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Thermal Runaway Suppression of High-Energy Lithium-Ion Batteries by Designing the Stable Interphase

Uncovering LiH Triggered Thermal Runaway Mechanism of a High-Energy LiNi0.5 Co0.2 Mn0.3 O2 /Graphite Pouch Cell

High‐Voltage and High‐Safety Practical Lithium Batteries with Ethylene Carbonate‐Free Electrolyte

Enhancing the Intrinsic Safety of Nickel-Rich Lithium-Ion Batteries by an Ethylene Carbonate-Free Electrolyte with Ethoxy(pentafluoro) Cyclotriphosphazene Additive

Nonflammable electrolyte with low exothermic design for safer lithium-based batteries

In Situ Inorganic-Rich Electrode–Electrolyte Interphases for Safer 4.5 V Gr||NCM811 Batteries Enabled by an Ethylene Carbonate-Free Electrolyte

Electrochemical performance and thermal stability analysis of LiNixCoyMnzO2 cathode based on a composite safety electrolyte

Dendrite‐accelerated thermal runaway mechanisms of lithium metal pouch batteries

Smart Solid‐State Interphases Enable High‐Safety and High‐Energy Practical Lithium Batteries

Electrolyte Design for Stable Electrode-Electrolyte Interphase to Enable High-Safety and High-Voltage Batteries

Unlocking the self-supported thermal runaway of high-energy lithium-ion batteries

Thermal runaway mechanism of lithium-ion battery with LiNi0.8Mn0.1Co0.1O2 cathode materials

Temperature‐Inert Interface Enables Safe and Practical Energy‐Dense LiNi0.91Co0.07Mn0.02O2 Pouch Cells

Experimental and Modeling Analysis of Thermal Runaway for LiNi0.5Mn0.3Co0.2O2/Graphite Pouch Cell Triggered by Surface Heating

An Experimental Study on Thermal Runaway Behavior for High-Capacity Li(Ni0.8Co0.1Mn0.1)O2 Pouch Cells at Different State of Charges

Solid-State Interphases Design for High-Safety, High-Voltage and Long-Cyclability Practical Batteries via Ethylene Carbonate-Free Electrolytes

Synergistic Dual-Salt Electrolyte for Safe and High-Voltage LiNi0.8Co0.1Mn0.1O2//Graphite Pouch Cells

Thermal Runaway Characteristics and Gas Composition Analysis of Lithium-Ion Batteries with Different LFP and NCM Cathode Materials under Inert Atmosphere

Investigation on Thermal Runaway of Li-Ion Cells Based on LiNi1/3Mn1/3Co1/3O2