Abstract:Studies of the production process of ferromolybdenum under industrial conditions feom Teghut molybdenite concentrate by using different reducing materials are carried out. Molybdenum can be reduced by carbon at low energy costs. However, the reduction of molybdenum oxides with carbon is accompanied by the formation of undesirable carbides Mo2C and MoCl-x. Due to the limitation of the carbon content in ferromolybdenum (≤0.05...0.5% C), it is obtained by the metallothermal method. In production, ferromolybde¬num is smelted by the out-of-furnace silicoaluminothermal method with an upper fuse from fired molybdenum concentrate (50.% Mo) and the use of ferro-silicon-aluminum (FSA) containing 60...65% Si and 10...12% Al, aluminum grains, iron ore, steel shavings and lime. The process takes place only due to the heat released by the reduction reactions of molybdenum, iron and other elements oxides with silicon and aluminum. From the standpoint of thermodynamics, the reduction reaction of molybdenum oxides by the carbothermal method has a positive value of enthalpy and entropy (due to the formation of CO), the total value of the change in Gibbs energy (∆G_T^0) remains negative and becomes smaller in absolute terms. That is why carbohydrate recovery requires external energy expenditure. On the contrary, when reducing by the aluminothermic and silicothe¬r¬m¬ic methods, the reactions are too negative, since these reactions are highly exothermic, and here the entropy factor does not affect the negative value of the change in Gibbs energy (∆G_T^0) (all reactants and the resulting products are in solid form), therefore the reactions are recovered due to the exothermicity of their own reactions and do not require external energy costs, which is the potential advantage of this method.

Hydrometallurgical processing of molybdenum middlings from Shatyrkul-Zhaysan cluster ore

Removal Mechanism of Mineral Impurities in Molybdenum Concentrate Treatment Process

Metals Recovery From Molybdenite Concentrate By Electrooxidation And Leaching

In-situ leaching of molybdenum and uranium by percarbonate and chloride-hypochlorite solutions

Improving the Copper-Molybdenum Ores Flotation Technology Using a Combined Collecting Agent

Research on removal of iron and copper from low-grade molybdenum calcine in strong acid system

A Good-prospect Hydrometallurgical Process for Molybdenite

An eco-friendly and low-cost approach for separation and recycling of Mo and Cu from molybdenite purification wastewater

Extraction of Molybdenum from Low-Grade Molybdenum Concentrates

Acid recovery from molybdenum metallurgical wastewater via selective electrodialysis and nanofiltration

SUBSTANTIATING THE PROCESS OF PRODUCTION OF FERROMOLYBDENUM FROM TEGHUT MOLYBDENITE CONCENTRATE UNDER PRODUCTION CONDITIONS

New Method of Rich Oxidized Zinc Ore Sulfuric Acid Leaching

Analysis on New Process and Industrialization of 57% Molybdenum Concentrate

Preparation of sodium molybdate from molybdenum concentrate by microwave roasting and alkali leaching

Extraction of non-ferrous metals and arsenic from fine dusts of copper smelter production by combined technology

Innovative technologies for processing tungsten containing tails of the enrichment factory of Zhambyl

Method for directly recovering molybdenum from molybdenum oxide fine grained disseminated raw ore

Extraction of Copper from Pregnant Leach Solution (PLS) and Reduction of Crud Formation

DEVELOPING A TECHNOLOGY FOR OBTAINING FERROMOLIBDENUM FROM MOLYBDENUM CONCENTRATE OF TEGHUT BY THE METHOD OF HIGH-TEMPERATURE SELF-PROPAGATING SYNTHESIS

Extraction of Molybdenum from Spent HDS Catalyst by Pressure Alkaline Leaching

Quantitative characterization and magnetic separation of copper pyrometallurgical tailing for molybdenum and copper pre-concentration and cleaning of environmentally hazardous elements