Abstract:The granular motion of binary-size mixture in a three-dimensional rotating drum operating in the rolling regime is numerically tracked via the discrete element method (DEM), with a focus on the axial dispersion behavior of the different particle types in response to the inherent size-segregation. Accordingly, the evolution with time, the frequency distribution and the space-time profiles of the axial dispersion coefficients are evaluated. The results demonstrate that (i) the fast radial segregation gives rise to the sharp increase and decrease of the axial dispersion coefficients of respectively the large and small particles in both the active and passive regions; (ii) the axial dispersion coefficients in the active region is an order-of-magnitude higher than that in the passive region; (iii) after the radial segregation, the frequency distributions of the axial dispersion coefficients of the large particles, the small particles and all the particles are normal distributions; (iv) the greatest axial dispersion coefficients of both particle types are at the upper part of the active region near the bed surface; (v) increasing the rotating speed and particle diameter ratio clearly enhances the axial dispersion intenstity in the active and passive regions; and (vi) axial segregation results in the greatest axial dispersion near the end walls, while most of the rest of the drum exhibit equally low axial dispersion. The results obtained here contribute towards understanding the dynamical response of the axial dispersion of different particle types to the inevitable radial and axial segregation phenomena, and are expected to be valuable for improving operations and advancing theoretical models of such granular systems with constituents of different sizes.

Prediction of particle mixing in rotary drums by a DEM data-driven PSO-SVR model

Studying on the Upper Limit of the Coarse-Grained DEM Model for Simulating Mixing Processes in a Rolling Drum with Complex Wall Boundary

Multi-level Coarse-Grained Discrete Element Method Modeling of Cylinder Particle Flow in a Rotating Drum

An Experimentally Validated Coarse-Grain DEM Study of Monodisperse Granular Mixing

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Investigating the Flow of Rod-Like Particles in a Horizontal Rotating Drum Using DEM Simulation

2D DEM Simulation of Particle Mixing in Rotating Drum: A Parametric Study

Optimized Structure Design for Binary Particle Mixing in Rotating Drums Using a Combined DEM and Gaussian Process-Based Model

Efficient DEM modeling of solid flavor particle mixing in a rotary drum

Numerical Study on Particle Mixing in a Double-Screw Conical Mixer

Geometrically Exact Discrete-Element-method (DEM) Simulation on the Flow and Mixing of Sphero-Cylinders in Horizontal Drums

Numerical and Experimental Study of Radial Segregation of Bi-Disperse Particles in a Quasi-Two-dimensional Horizontal Rotating Drum

DEM investigation of the axial dispersion behavior of a binary mixture in the rotating drum

Modelling of the Flow of Ellipsoidal Particles in a Horizontal Rotating Drum Based on DEM Simulation

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Three-dimensional DEM Simulation of Polydisperse Particle Flow in Rolling Mode Rotating Drum

Investigation of Modeling Non-Spherical Particles by Using Spherical Discrete Element Model with Rolling Friction

Numerical Investigation of a Vertical Roller Mill Using DEM-MBD Coupling Method

An experimentally validated DEM study of powder mixing in a paddle blade mixer

Establishment and Verification of a Model for the Movement of Pulverized Sweet Sorghum Stalks in a Rotary Drum Bioreactor by Discrete Element Method

Multi-level coarse-grained DEM modelling of cylinder particle flow in a rotating drum