Abstract:A phase-field description of brittle fracture is employed in the reported four-point bending analyses of monolithic and laminated glass plates. Our aims are: (i) to compare different phase-field fracture formulations applied to thin glass plates, (ii) to assess the consequences of the dimensional reduction of the problem and mesh density and refinement, and (iii) to validate for quasi-static loading the time-/temperature-dependent material properties we derived recently for two commonly used polymer foils made of polyvinyl butyral or ethylene-vinyl acetate. As the nonlinear response prior to fracture, typical of the widely used Bourdin–Francfort–Marigo model, can lead to a significant overestimation of the response of thin plates under bending, the numerical study investigates two additional phase-field fracture models providing the linear elastic phase of the stress-strain diagram. The typical values of the critical fracture energy and tensile strength of glass lead to a phase-field length-scale parameter that is challenging to resolve in the numerical simulations. Therefore, we show how to determine the fracture energy concerning the applied dimensional reduction and the value of the length-scale parameter relative to the thickness of the plate. The comparison shows that the phase-field models provide very good agreement with the measured stresses and resistance of laminated glass, despite the fact that only one/two cracks are localised using the quasi-static analysis, whereas multiple cracks evolve during the experiment. It was also observed that the stiffness and resistance of the partially fractured laminated glass can be well approximated using a 2D plane-stress model with initially predefined cracks, which provides a better estimation than the one-glass-layer limit.

Smeared fixed crack model for quasi-static and dynamic biaxial flexural response analysis of aluminosilicate glass plates

Peridynamic simulation for the damage patterns of glass considering the influence of rate-dependence and pre-defects

Development of a dynamic model for crack propagation in glazing system under thermal loading

The Dynamic Response of Brittle Materials under Impact Loading

Ab Initio Molecular Dynamics Simulation of the Structural and Electronic Properties of Aluminoborosilicate Glass

An Analytical Model for Deformation and Damage of Rectangular Laminated Glass under Low-Velocity Impact

Dynamic mechanical performance and constitutive model for Zr58Cu12Ni12Al15Nb3 metallic glass

An Ordinary State-Based Peridynamic Modeling for Dynamic Fracture of Laminated Glass under Low-Velocity Impact

Phase-Field Fracture Modelling of Thin Monolithic and Laminated Glass Plates under Quasi-Static Bending

Finite Element Analysis of Bearing Properties of In-plane Bending Glass Plate

Modeling brittle crack propagation for varying critical load levels: a dynamic phase-field approach

Scratch-induced micro-fracture behaviour and translational failure of glass: An experimental and numerical study

A meso-mechanical constitutive model of bulk metallic glass composites considering the local failure of matrix

A finite element model for impact simulation with laminated glass

Dynamic damage assessment of float glass under blast loading

Flexural Behavior of In-Plane Bending Glass Structures for Design Method

Predicting Fracture Propensity in Amorphous Alumina from Its Static Structure Using Machine Learning

Simulation of the Crack Resistance of Ion-Exchange Strengthened Silicate Glass Subject to Bending Strain

Experimental and Numerical Analysis of the Quasi-Static and Dynamic Behavior of Silicate Materials

Evaluating the residual stresses and fracture behavior of glass-ceramics by numerical modeling

Comparative Study on Crack Initiation and Propagation of Glass under Thermal Loading