Abstract:Laser Powder Bed Fusion (L-PBF) provides great advantages in creating supersaturated solid solutions due to its intrinsic ultrafast cooling and high solidification rate, which is particularly desired for enhanced solid solution strengthening and precipitation strengthening. In the present work, a novel high strength Zr/Sc/Hf-modified Al-Mn-Mg alloy with a good L-PBF processability is investigated. The as-built alloy exhibits a heterogeneous microstructure featuring a bi-modal grain structure with coarse columnar and fine equiaxed grains and heterogeneously distributed nanometer and submicrometer-sized cuboid-shaped primary Al3(Sc,Zr,Hf) particles. The Al3(Sc,Zr,Hf) phase, exhibiting a homogeneous elemental distribution of Zr, Sc, and Hf, adopts a cubic L12 structure with a lattice parameter of 0.4044 ± 0.009 nm, showing a good coherency with α-Al. Additionally, the rapid L-PBF solidification enables the formation of submicrometer-sized elongated and globular primary Al6Mn and a supersaturated Al matrix with a high dislocation density. This results in a good combination of strength (yield strength of 438 ± 3 MPa and ultimate tensile strength of 504 ± 2 MPa) and ductility (elongation at fracture of 10.9 ± 1.4 %), with a moderate work hardening strength of 113 ± 12 MPa. Direct-ageing at 325 °C for 10 h promotes the formation of a large amount of rod-shaped Al6Mn precipitates and a few spherical Al3(Sc,Zr,Hf) nanoprecipitates. The heat treatment increases the hardness from 166 ± 2 HV in as-built condition to 173 ± 4 HV and enhances the tensile strength (yield strength of 487 ± 2 MPa and ultimate tensile strength of 542 ± 3 MPa) but slightly reduces the ductility to 7.4 ± 0.7 %. The high strength was achieved by the synergistic effect of grain boundary strengthening, solid solution strengthening, and Orowan strengthening mechanisms.

A high strength Al–Li alloy produced by laser powder bed fusion: Densification, microstructure, and mechanical properties

High strength Al–Li alloy development for laser powder bed fusion

A Novel High-Strength Al-Li Alloy Printed by Laser Powder Bed Fusion: Microstructural Evolution and Strengthening Mechanism

An aluminum-lithium alloy produced by laser powder bed fusion

Developing a novel lightweight Al–Mg–Li alloy for laser powder bed fusion additive manufacturing: Parameter optimization, microstructure evolution, and mechanical performance

A high Fe-containing AlSi12 alloy fabricated by laser powder bed fusion

A crack-free and high-strength Al-Cu-Mg-Mn-Zr alloy fabricated by laser powder bed fusion

High strength Al-Cu-Mg based alloy with synchronous improved tensile properties and hot-cracking resistance suitable for laser powder bed fusion

A High Strength Near-Eutectic Al-Mg-Si Alloy Manufactured by Laser Powder Bed Fusion

Laser powder bed fusion of a tungsten-nickel-ferrum alloy via in-situ alloying: Densification, microstructure, and mechanical properties

Development of a high strength Zr/Sc/Hf-modified Al-Mn-Mg alloy using Laser Powder Bed Fusion: Design of a heterogeneous microstructure incorporating synergistic multiple strengthening mechanisms

Microstructural Evolution and Strengthening Mechanisms of a High-Strength Al-Mg-Si Alloy Processed by Laser Powder Bed Fusion and Ageing Treatment

Strong and ductile Al–Mn–Mg–Sc–Zr alloy achieved in fabrication-rate enhanced laser powder bed fusion

Microstructure characterization and mechanical properties of crack-free Al-Cu-Mg-Y alloy fabricated by laser powder bed fusion

Developing a Novel High-Strength Al–Mg–Zn–Si Alloy for Laser Powder Bed Fusion

Microstructural Evolution and Mechanical Properties of 2195 Al-Li Alloy Processed by Rapid Solidification and Thermo-Mechanical Processing

Laser Powder Bed Fusion of a Novel High Strength Al-Mg Alloy Via Si and Zn Microalloying

Microstructure, Mechanical Properties and Multiphase Synergistic Strengthening Mechanisms of LPBF Fabricated AlZnMgZr Alloy with High Zn Content

Microstructural Origin of High Strength and High Strain Hardening Capability of a Laser Powder Bed Fused AlSi10Mg Alloy

Achieving High Strength in Laser Powder-Bed Fusion Processed AlFeCuZr Alloy Via Dual-Nanoprecipitations and Grain Boundary Segregation

Design high-strength Al-Mg-Si alloy fabricated by laser powder bed fusion: Cracking suppression and strengthening mechanism