Abstract:Recently MXenes become the focus of emerging 2D layered materials family owing to their unique properties and promising potential in gas detection. However, the sensitivity and the stability of the pristine MXenes are poor due to their high carrier concentration and abundant active sites on the surface. Herein, superior NH3 sensors with high response and stability were successfully obtained by wrapping the SnO2 nanoparticles on Ti3C2Tx MXene nanosheets via a facile hydrothermal method. The nanostructures, morphologies, and compositions of the Ti3C2Tx MXene-SnO2 composite were systematically characterized by XRD, FTIR, SEM, TEM and XPS techniques. Results show that SnO2 nanoparticles with high specific surface area are uniformly dispersed on the Ti3C2Tx MXene surface, constructing loose heterostructure, which plays a crucial role in gas adsorption/desorption. In the Ti3C2Tx MXene-SnO2 heterostructure, the Ti3C2Tx MXene acts as a signal amplification channel for electron transfer in gas sensing reaction. The sensors exhibit excellent NH3 gas detection at room temperature. Response as high as 75% is observed for 500 ppm NH3 gas. Fast response and recovery times are also obtained, 109 and 342 s, respectively. Moreover, the sensing performances of the Ti3C2Tx MXene-SnO2 composite with various MXene ratios were systematically studied. It is found out that the 16.8%Ti3C2Tx-SnO2 based sensor shows the highest sensitivity in 10∼100 ppm range, and the 9.1%Ti3C2Tx-SnO2 based sensor exhibits the widest detection range. In addition, the selectivity and repeatability were also studied, revealing high selectivity and stability of the Ti3C2Tx MXene-SnO2 composite. Thus, Ti3C2Tx-SnO2 composite provides a new material to design and develop superior room temperature NH3 gas sensors.

Preparation and Chemosensory Properties of Nanocomposite Obtained by Hydrothermal Modification of Ti2CTx with Hierarchically Organized Co(CO3)0.5(OH)⋅0.11H2O

Nanocomposites of Carbon Nanotube (cnts)/cuo with High Sensitivity to Organic Volatiles at Room Temperature

Preparation and Chemosensory Properties of Composite Material Ti2CTx–10 mol % SnO2

Chemosensory Properties of Nanocomposite Ti0.2V1.8CTx–V2O5–SnO2

Highly Selective H2S Gas Sensor Based on Ti3C2Tx MXene-Organic Composites

Highly Selective Triethylamine Gas Sensor Based on ZnO/Ti3C2Tx MXene Self-Assembly Heterostructure

Room temperature gas sensing under UV light irradiation for Ti3C2Tx MXene derived lamellar TiO2-C/g-C3N4 composites

Synthesis of a novel nanocomposite of CoTMPyP/Ti3C2 (MXenes) for catechol detection

Enhanced ammonia sensing performance based on MXene-Ti3C2Tx multilayer nanoflakes functionalized by tungsten trioxide nanoparticles

Application of Titanium Carbide MXenes in Chemiresistive Gas Sensors

Nanohybrids of a MXene and transition metal dichalcogenide for selective detection of volatile organic compounds

Facile Preparation of a Composite of TiO2 Nanosheets and Polyaniline and Its Gas Sensing Properties

Designing advanced 2D/2D heterojunctions of MoS2 nanosheets/Ti3C2Tx MXene in gas-sensing applications

2D/2D {001}TiO2-/Ti3C2T composite with ultra-high sensing performance for NO2 at room temperature

Enhanced Gas Sensing Performance of ZnO/Ti3C2Tx MXene Nanocomposite

Facile hydrothermal synthesis of Ti3C2Tx-TiO2 nanocomposites for gaseous volatile organic compounds detection at room temperature

Facile Fabrication of Oxygen‐Enriched MXene‐Based Sensor and Their Ammonia Gas‐Sensing Enhancement

Ti3C2Tx MXene-SnO2 nanocomposite for superior room temperature ammonia gas sensor

Synergistic combination of 2-D MXene and MoO3 nanoparticles for improved gas sensing at room temperature

High Sensitivity Bi2O3/Ti3C2Tx Ammonia Sensor Based on Improved Synthetic MXene Method at Room Temperature

D-Band Center Optimization of Ti3C2Tx MXene Nanosheets for Ultrahigh NO2 Gas Sensitivity at Room Temperature.