Abstract:Biomass is one of the most important renewable resources. Pyrolysis for producing high value added products provides additional value for biomass energy utilization. Through the introduction of exogenous nitrogen in biomass pyrolysis in nitrogen-rich conditions, it can get high value of nitrogen-containing products, i.e. nitrogen-rich char and oil. In this study, wood chips were used as raw materials. The experiment was carried out in a fixed bed reactor at 350 to 850℃, and the effect of temperature and impregnation ratio(5%, 10%, 15%, 20%) on products yields, compositions and characteristics were investigated. Firstly, wood chips were immersed in different mass fractions of urea solution, stirred for 12 hours with a magnetic mixer at room temperature. The woodchips was then separated from solution by filtration and was dried after for 24 hours in an oven. The dried woodchips was then gone through pyrolysis and the bio-oil obtained at different temperatures was analyzed by gas chromatography-mass spectrometry. Derived bio-oil and char were also analyzed for their compositions to trace nitrogen mass transfer. The surface physicochemical property of the char under nitrogen-rich conditions was characterized using a diffuse reflectance infrared spectroscopy and X-ray photoelectron spectroscopy. With the rise of impregnation ratio, the yield of char and bio-oil had little change. Temperature had a remarkable effect on the yield and nitrogen content of boichar and bio oil. Change of product yields was mainly due to the three components (cellulose, ligin and semicellulose) decomposing at different temperatures, and to the volatilization of the secondary cracking at high temperature. The GC-MS results indicated that after treated with urea solution, biomass pyrolysis oil contains large amounts of nitrogen-containing chemicals that can be used to refine high value-added chemical products. The nitrogen-containing chemicals in the bio-oil mainly include aromatic amine, nitrogenous heterocyclic compounds and amide substances. As the temperature increased, the nitrogen content in pyrolysis bio-oil decreased. The larger of urea solution mass fraction, the more nitrogen-containing chemicals in the pyrolysis oil. Pyrolysis char surface contains large amounts of aromatic structure and abundant nitrogen-containing functional groups. Diffuse reflectance IR analysis showed that at the low temperature char surface was rich in C-N, and -NH groups caused by reactions of amino and bio-char. It was confirmed that introducing the exogenous nitrogen into the biomass pyrolysis process can produce nitrogen rich char with a large number of nitrogen-containing functional groups. With temperature increasing, various functional groups decomposed gradually. At 750 and 850℃ only some hydroxyl groups and carbonyl groups were left on the char surface. The urea solution mass fraction had less effect on the types of surface functional groups on the pyrolysis char, but impacted functional group intensity. XPS analysis revealed that the char surface mainly contained C=N, C-N and N-COO functional groups and at 850℃, the char surface only contained pyridine-N and pyrrole-N. This phenomenon could be explained by that thermal stability of pyridine-N and pyrrole-N was better than amide substances. At the pyrolysis temperature of 550℃, the carbon in pyrolysis char was mainly amorphous carbon. With temperature increasing, some aliphatic chain C-H bond, carbonyl and some oligomeric C-C bonds disappeared, while when the temperature reached 850℃, the carbon in char was dominated by graphite carbon.

Characteristics of bio-oil and biochar from cotton stalk pyrolysis: Effects of torrefaction temperature and duration in an ammonia environment

Effect of torrefaction on characteristics of pyrolytic products of biomass

Torrefaction of biomass stalk and its effect on the yield and quality of pyrolysis products

The Effect of Pyrolysis Temperature on the Characteristics of Biochar, Pyroligneous Acids, and Gas Prepared from Cotton Stalk Through a Polygeneration Process

Physicochemical properties of nitrogen rich in oil and char during biomass nitrogen-rich pyrolysis

Ammonia (NH3)/nitrogen (N2) torrefaction pretreatment of waste biomass for the production of renewable nitrogen-containing chemicals via catalytic ammonization pyrolysis: Evolution of fuel-N under a N2/NH3-rich atmosphere

Comparative assessment of water and organic acid washing pretreatment for nitrogen-rich pyrolysis: Characteristics and distribution of bio-oil and biochar

Integrated Production of Aromatic Amines, Aromatic Hydrocarbon and N-heterocyclic Bio-Char from Catalytic Pyrolysis of Biomass Impregnated with Ammonia Sources over Zn/HZSM-5 Catalyst

Preparation of nitrogen-containing compounds and nitrogen-doped biochar via nitrogen-rich pyrolysis coupled with ammonia source impregnation

Nitrogen enriched biochar modified by high temperature CO 2 –ammonia treatment: Characterization and adsorption of CO 2

N-doping of Biomass by Ammonia (NH3) Torrefaction Pretreatment for the Production of Renewable N-containing Chemicals by Fast Pyrolysis.

Urea assisted pyrolysis of corn cob residue for the production of functional bio-oil

Study on the properties and components of solid-liquid products by co-pyrolysis of sludge and cotton stalk

In-situ bio-oil directional conversion mechanism of catalytic biomass pyrolysis over nitrogen-doped carbon preparation by grading of nitrogen-rich cow dung

Effect of biomass type and pyrolysis temperature on nitrogen in biochar, and the comparison with hydrochar

Investigation on Biomass Nitrogen-Enriched Pyrolysis: Influence of Temperature

Torrefaction of agriculture straws and its application on biomass pyrolysis poly-generation

Effect of Torrefaction on the Physiochemical Characteristics and Pyrolysis of the Corn Stalk

Influence of NH3 Concentration on Biomass Nitrogen-Enriched Pyrolysis.

EFFECT OF TORREFACTION ON CHARACTERISTICS OF CATALYTIC PYROLYSIS PRODUCT OF BIOMASS

Biochar N Content, Pools and Aromaticity as Affected by Feedstock and Pyrolysis Temperature