Abstract:Wind turbines have had various limitations to their mechanical system reliability owing to tribological problems over the past few decades. While several studies show that turbines are becoming more reliable, it is still not at an overall acceptable level to the operators based on their current business models. Data show that the electrical components are the most problematic; however, the parts are small, thus easy and inexpensive to replace in the nacelle, on top of the tower. It is the tribological issues that receive the most attention as they have higher costs associated with repair or replacement. These include the blade pitch systems, nacelle yaw systems, main shaft bearings, gearboxes and generator bearings, which are the focus of this review paper. The major tribological issues in wind turbines and the technological developments to understand and solve them are discussed within. The study starts with an overview of fretting corrosion, rolling contact fatigue, and frictional torque of the blade pitch and nacelle yaw bearings, and references to some of the recent design approaches applied to solve them. Also included is a brief overview into lubricant contamination issues in the gearbox and electric current discharge or arcing damage of the generator bearings. The primary focus of this review is the detailed examination of main shaft spherical roller bearing micropitting and gearbox bearing scuffing, micropitting and the newer phenomenon of white-etch area flaking. The main shaft and gearbox are integrally related and are the most commonly referred to items involving expensive repair costs and downtime. As such, the latest research and developments related to the cause of the wear and damage modes and the technologies used or proposed to solve them are presented.

Friction-increasing mechanism of contact pair using different surface treatment processes

INFLUENCE OF MOISTURE CONDITION AND SILICA SAND ON FRICTION COEFFICIENT OF WIND TURBINE BRAKE SYSTEM

Dynamics characteristics of wind turbine gear pairs considering lubrication and tooth surface roughness

Friction and Wear Performances of Materials for Wind Turbine Sliding Bearing Bushes

Tribological advancements for reliable wind turbine performance

Study on the Influence Law of Micro-Scale Abrasive Wear on a Wind Turbine Brake Pad

Experimental Friction Damping Characteristic Of A Steam Turbine Blade Coupled By Shroud And Snubber At Standstill Set-Up

Rough surface damping contact model and its space mechanism application

A Study of Tribological Performance Prediction Based on Surface Texture Parameters

Experimental Study on Dry Friction Damping Characteristics of the Steam Turbine Blade Material with Nonconforming Contacts

Improve the Friction Condition to Realize Less-loading Forming

Research progress of improving surface friction properties by surface texture technology

Study on predicting rolling contact fatigue of pitch bearing raceway in offshore wind turbine

Enhancing wind turbine energy efficiency: Tribo-dynamics modeling and shape modification

A Friction Mechanism for Surface Texturing under Dry/mixed Lubrication Conditions Based on the Sublinear Dependence of Friction on Load

Numerical and Experimental Study of a Sector-Shaped Surface Texture in Friction Reduction

Numerical modeling on friction and wear behaviors of all-metal progressive cavity pump

Nonlinear analysis of a dual-disk rotor system considering elastoplastic contact

Thermal-Fluid-Solid Coupling Mechanism of a Novel Friction Reduction Cooling Structure for Gas Turbine

Dynamic Modeling and Analysis of Wind Turbine Drivetrain Considering the Effects of Non-Torque Loads

On the Dynamics and Wear Properties of Dry Friction Bearings in Motor Rotor System Considering Rough Surface Contact Damping