Thermal performance of two evacuated tube solar collectors with flat heat pipes
Dengke Zhang,Yanhua Diao,Zeyu Wang,Yawen Pan,Mengda Sun,Xinran Wang,Peiyuan Du,Yaohua Zhao
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122366
IF: 6.4
2024-01-13
Applied Thermal Engineering
Abstract:To promote the transition to clean heating methods in rural areas and improve solar energy utilization efficiency, two new types of solar water collectors with evacuated tubes, namely finned and finless collectors, are constructed with multi-channel flat tubes and flat micro-heat pipe arrays, and comparison experiments are conducted. By integrating with multi-channel flat tubes, the micro-heat pipe arrays, which function as the central heat transfer component, are capable of attaining effective thermal transmission. The multi-channel flat tubes have a substantial surface area available for heat transfer with the thermal fluid, while the evacuated tubes exhibit superior thermal insulation performance. The structural discrepancy between the two collectors lies in the presence or absence of louvered fins attached to the flat heat pipes inside the evacuated tubes. The comparative analysis of the two collectors includes time constant, thermal resistance analysis, distribution of temperature, normalized temperature difference, pressure drop, and actual operation effect under different conditions. The average thermal efficiency of the finless collector (59.4 %) is lower than that of the finned collector (78.2 %) on a typical experimental day. Then, further investigations are conducted to explore the effects of heat transfer fluid volume flow rate and inlet temperature on the thermal performance of finned solar water collector. With the heat transfer fluid volume flow rate of 120 L/h and the inlet temperature at 15 °C, the finned collector can achieve its maximum thermal efficiency of 86.4 %.
energy & fuels,engineering, mechanical,thermodynamics,mechanics