Abstract:Currently, Pb poisoning of heterogeneous catalysts is considered to be a key area of interest in research involved with industrial NOx reduction. As such, a series of Pb-poisoned V2O5-WO3/TiO2 catalysts were prepared by a wet impregnation method and the influence of SO2 on the performance of these poisoned catalysts for NOx reduction was assessed both experimentally and using theoretical calculations. As expected, the incorporation of Pb in these materials resulted in a significant reduction in their catalytic performance. The conversion of NOx over the Pb-V2O5-WO3/TiO2 catalyst increased from approximately 50% to 90% in presence of SO2 (2000 ppm) at 350 degrees C. It was postulated that in the absence of SO2, Pb reacts with surface V-OH species, which ultimately results in the destruction of Bronsted acid sites; considered to be crucial for the catalytic conversion of NOx. In the presence of SO2 however, enhanced catalytic activity was observed which was suggested to be a result of the formation of additional Bronsted sites (S-OH) via a surface bidentate sulfate intermediate species. The formation of these species was attributed to the interaction of Pb with SO2 and O-2 on the surface of the catalyst. Density functional theory (DFT) calculations based on a monolayer V model on TiO2 (001) showed that SO2 absorbed selectively onto Pb sites rather than V or Ti oxides. It was subsequently determined that NH3 absorption proceeds through the formation of Pb-N species with Pb atom and H-O with SO2. We believe that the present work provides new insights into the design and application of SCR catalysts with specific relevance for application in flue gas streams which contain high quantities of Pb content.

Study on the Deterioration Mechanism of Pb on TiO2 Oxygen Sensor

Progress in Photocatalytic Oxidation of Organic Contaminants Using TiO2 as the Catalyst

Comparison of Pt and Pd Modified TiO2 Gas Sensors

Design and Fabrication of TiO2 Thin Films Oxygen Sensors

Performance and doped mechanism of a novel PbO_2 anode

Experimental Validation of the Importance of Thermally Stable Bulk Reduction States in Tio2 for Gas Sensor Applications

The Remarkable Promotional Effect of SO2 on Pb-poisoned V2O5-WO3/TiO2 Catalysts: an In-Depth Experimental and Theoretical Study

Synergistic Au Passivation and Prolonged Aging Optimization Enhance the Long-Term Catalytic Stability of Porous YSZ/Pt Electrodes

TiO2 Gas Sensors Combining Experimental and DFT Calculations: A Review

Resistive-type VOCs and pollution gases sensor based on SnO2: A review

Inhibition effects of Pb species on the V2O5-MoO3/TiO2 catalyst for selective catalytic reduction of NO with NH3: A DFT supported experimental study

[Effect of Heat Treatment on the Electrocatalytic Activity of SnO2/Ti Anode in Degradation of P-Benzoquinone].

Systematic Investigation on the Gas-Sensing Performance of TiO 2 Nanoplate Sensors for Enhanced Detection on Toxic Gases

Impacts of Pb and SO2 Poisoning on CeO2-WO3/TiO2-SiO2 SCR Catalyst

Fabrication and characterization of titanium‐based lead dioxide electrode by electrochemical deposition with Ti <sub>4</sub> O <sub>7</sub> particles

Response Time And Mechanism Of Pd Modified Tio2 Gas Sensor

Effect of Material Properties of Feedback Part on Thermoelectric Gas Sensor

OBD System Oxygen Sensor Degradation Monitoring and Mechanism Analysis

Fabrication And Characterization Of Titanium-Based Lead Dioxide Electrode By Electrochemical Deposition With Ti4o7 Particles

Influence factors of TiO2 photocatalytic degradation of gaseous pollutants

Real-time electrochemical monitoring sensor for pollutant degradation through galvanic cell system