Abstract:Thermophotovoltaic (TPV) device is a thermoelectric conversion method with great application prospects. In the far-field regime, the thermoelectric power is usually small due to the Planck blackbody radiation limit, but can be substantially enhanced in the near-field regime where evanescent waves will participate in the heat transfer by tunneling. In this aspect, the surface optical density of state is a key factor that will determine the transfer conversion of thermal photons. Plasmonic or phononic resonance materials have been discussed in the literature to acquire large heat flux. Besides, metamaterial is another way to pursue the design freedoms for the same purpose. In this work, we propose a [CaF2/W]n multilayer based infrared hyperbolic metamaterial (HMM) with high surface density of states as an emitter of a high-performance TPV cell made of an InSb p-n junction (energy bandgap = 0.17 eV). The effective medium theory (EMT) is utilized to describe the electromagnetic behavior of the HMM. The near-field heat flux is calculated based on electrodynamic wave theory and Green's function method, and the photocurrent of thermophotovoltaic device is derived using diffusion equation for semiconductor. For comparison, we design three different radiators, i.e. tungsten film (W), [GaF2/W]n multilayer hyperbolic metamaterial (HMM), and tungsten-grounded HMM (WHMM). Compared with the pure tungsten radiator, the artificial structure exhibits the hyperbolic dispersion characteristic in a wide frequency range, which gives rise to a higher local density of states, in particular in the hyperbolic-to-elliptic spectral transition region. As a result, the radiation power and the energy conversion efficiency are greatly enhanced, which are more easily realized by a matched emission band achieved by the structural design. We find that the thermophotovoltaic device with WHMM radiator has a similar power and conversion efficiency to that with the HMM radiator. The influence of the substrate can be ignored when the hyperbolic metamaterial is thicker than 140 nm, very beneficial to the actual fabrication of the device. By our system, with multilayer hyperbolic metamaterial (HMM) radiator, a high electric power >1 W/m2 and a conversion efficiency about 11% can be obtained at a bias temperature of 200 K and a 100 nm vacuum gap. Compared with nanowire arrays or natural hyperbolic material, the multilayer structure proposed in this paper has obvious advantages in bandwidth and manufacturing and may find important applications in near-field thermophotovoltaic device and other relevant areas.

Hierarchically Porous Cellulose Membrane via Self‐Assembly Engineering for Ultra High‐Power Thermoelectrical Generation in Natural Convection

Ultra-high Performance of Ionic Thermoelectric-Electrochemical Gel Cells for Harvesting Low Grade Heat

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter

Cellulose ionic conductors with high differential thermal voltage for low-grade heat harvesting

Hybrid Photothermal Pyroelectric and Thermogalvanic Generator for Multisituation Low Grade Heat Harvesting

Cellulose‐Based Radiative Cooling and Solar Heating Powers Ionic Thermoelectrics

Cellulose binary coatings with spherical envelope structure via structure rearrangement in ball milling for integrated radiative cooling-electricity generation

A day-night solar thermoelectric generator enabled by phase change material and forced water cooling

Highly conductive phase change composites enabled by vertically-aligned reticulated graphite nanoplatelets for high-temperature solar photo/electro-thermal energy conversion, harvesting and storage

Biomass-based phase change material gels demonstrating solar-thermal conversion and thermal energy storage for thermoelectric power generation and personal thermal management

Flexible hydrogel with a coupling enhanced thermoelectric effect for low-grade heat harvest

Ultrahigh Thermoelectric Power Generation from Both Ion Diffusion by Temperature Fluctuation and Hole Accumulation by Temperature Gradient

Large-area nanofiber membrane of NIR photothermal Cs 0.32 WO 3 for flexible and all-weather solar thermoelectric generation

Simultaneously Enhanced Energy Harvesting and Storage Performance Achieved by 3D Mix‐Phase Mose2‐Nise/NF

Ionic Power Generation on a Scalable Cellulose@polypyrrole Membrane: The Role of Water and Thermal Gradients

Highly conductive triple network hydrogel thermoelectrochemical cells with low-grade heat harvesting

"One stone two birds" or "you can't have your cake and eat it too"? Effects of device dimensions and position of the thermoelectric module on simultaneous solar-driven water evaporation and thermoelectric generation

Double-layered and shape-stabilized phase change materials with enhanced thermal conduction and reversible thermochromism for solar thermoelectric power generation

Synergistic improvement of Seebeck coefficient and power density of an aqueous thermocell using natural convection for low-grade heat utilization

Hybrid nanoarchitectonics of carbon/titanium carbide integrated hydrogel/melamine foam for highly efficient solar steam and thermoelectric power generation

Hierarchically Porous Cellulose Membrane via Self‐Assembly Engineering for Ultra High‐Power Thermoelectrical Generation in Natural Convection

Ultra-high Performance of Ionic Thermoelectric-Electrochemical Gel Cells for Harvesting Low Grade Heat

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter

High-performance near-field thermophotovoltaic device with CaF&lt;sub&gt;2&lt;/sub&gt;/W multilayer hyperbolic metamaterial emitter

Cellulose ionic conductors with high differential thermal voltage for low-grade heat harvesting

Hybrid Photothermal Pyroelectric and Thermogalvanic Generator for Multisituation Low Grade Heat Harvesting

Cellulose‐Based Radiative Cooling and Solar Heating Powers Ionic Thermoelectrics

Cellulose binary coatings with spherical envelope structure via structure rearrangement in ball milling for integrated radiative cooling-electricity generation

A day-night solar thermoelectric generator enabled by phase change material and forced water cooling

Highly conductive phase change composites enabled by vertically-aligned reticulated graphite nanoplatelets for high-temperature solar photo/electro-thermal energy conversion, harvesting and storage

Biomass-based phase change material gels demonstrating solar-thermal conversion and thermal energy storage for thermoelectric power generation and personal thermal management

Flexible hydrogel with a coupling enhanced thermoelectric effect for low-grade heat harvest

Ultrahigh Thermoelectric Power Generation from Both Ion Diffusion by Temperature Fluctuation and Hole Accumulation by Temperature Gradient

Large-area nanofiber membrane of NIR photothermal Cs 0.32 WO 3 for flexible and all-weather solar thermoelectric generation

Simultaneously Enhanced Energy Harvesting and Storage Performance Achieved by 3D Mix‐Phase Mose2‐Nise/NF

Ionic Power Generation on a Scalable Cellulose@polypyrrole Membrane: The Role of Water and Thermal Gradients

Highly conductive triple network hydrogel thermoelectrochemical cells with low-grade heat harvesting

"One stone two birds" or "you can't have your cake and eat it too"? Effects of device dimensions and position of the thermoelectric module on simultaneous solar-driven water evaporation and thermoelectric generation

Double-layered and shape-stabilized phase change materials with enhanced thermal conduction and reversible thermochromism for solar thermoelectric power generation

Synergistic improvement of Seebeck coefficient and power density of an aqueous thermocell using natural convection for low-grade heat utilization

Hybrid nanoarchitectonics of carbon/titanium carbide integrated hydrogel/melamine foam for highly efficient solar steam and thermoelectric power generation

High-performance near-field thermophotovoltaic device with CaF<sub>2</sub>/W multilayer hyperbolic metamaterial emitter