Abstract:Bi 2 Te 3 -based materials can be assembled into promising thermoelectric generators (TEGs) used for room temperature applications, yet their regulation for a wide range of applications, like the Internet of Things (IoTs), is limited by the small open circuit voltage, poor output power and large energy loss resulting from parasitic depletion to some extent. In this work, we have fabricated high-density thermoelectric generators (HD-TEGs) to compensate for these shortages, and the boosted voltage could reduce the energy loss simultaneously. To integrate HD-TEGs, the fabrication processes manipulate electrode deposition and reflow soldering techniques of delivering micro- and bulk-TEGs. Subsequently, a normalized power density of ∼13.7 μW cm −2 K −2 , along with an open circuit voltage of ∼1.9 V, calculated contact depletion of ∼36% and experimental circuit depletion of ∼5% at Δ T of 13 K, has been achieved in a HD-TEG with 338 thermocouples (Tcs). Upon increasing Δ T to 73 K, the open circuit voltage and maximum output power are ∼10.1 V and 843.2 mW, which exceed those of the 50-Tcs TEG with packing fraction ( f ) of 5% and 34%, as well as the 200-Tcs TEG ( f = 20%). These conversion properties are even much better than those of most commercial TEGs. Further, the finite-element simulation data indicate that output power and open circuit voltage could be further optimized to ∼68.5 mW (25.4 μW cm −2 K −2 ) and ∼2.9 V at Δ T of 13 K, by further increasing the density of thermoelectric elements and reducing contact loss. Moreover, our study elucidates that fabricating TEGs by using a high-density approach, i.e. , optimizing packing fraction by increasing the quantity of thermocouples, could be an effective avenue for achieving high output performance with superior critical voltage and small energy loss.

Ultrahigh Thermoelectric Power Generation from Both Ion Diffusion by Temperature Fluctuation and Hole Accumulation by Temperature Gradient

Ultra-high Performance of Ionic Thermoelectric-Electrochemical Gel Cells for Harvesting Low Grade Heat

An Ionic Thermoelectric Generator with a Giant Output Power Density and High Energy Density Enabled by Synergy of Thermodiffusion Effect and Redox Reaction on Electrodes

Flexible hydrogel with a coupling enhanced thermoelectric effect for low-grade heat harvest

Thermodynamics of Ionic Thermoelectrics for Low-Grade Heat Harvesting

A double network facilitated ion-electron conductor for thermoelectric harvesting with high energy density

Tailoring P-N Conversion in All-solid-state Polymer Composites with A Record Ionic Thermopower

N-type and P-type series integrated hydrogel thermoelectric cells for low-grade heat harvesting

Stretchable Polyvinyl Alcohol and Sodium Alginate Double Network Ionic Hydrogels for Low-Grade Heat Harvesting with Ultrahigh Thermopower

Defect Engineering Stabilized AgSbTe2 with High Thermoelectric Performance

Proton-Coupled Electron Transfer Aided Thermoelectric Energy Conversion and Storage

Ionic Organic Thermoelectrics with Impressively High Thermopower for Sensitive Heat Harvesting Scenarios

Optimizing the output performance and parasitic depletion of Bi2Te3-based thermoelectric generators by using a high-density approach

Tellurium-Nanowire-Doped Thermoelectric Hydrogel with High Stretchability and Seebeck Coefficient for Low-Grade Heat Energy Harvesting

Highly Stretchable, Low-Hysteresis, and Antifreeze Hydrogel for Low-Grade Thermal Energy Harvesting in Ionic Thermoelectric Supercapacitors

Gigantic Effect Due to Redox Electrodes on Thermoelectric Properties of Ionic Thermoelectric Devices

Mixed Ionic-Electronic Conducting Hydrogels with Carboxylated Carbon Nanotubes for High Performance Wearable Thermoelectric Harvesters

Structural Design for Wearable Self-Powered Thermoelectric Modules with Efficient Temperature Difference Utilization and High Normalized Maximum Power Density

Giant Thermopower of Hydrogen Ion Enhanced by a Strong Hydrogen Bond System

High-efficiency thermoelectrochemical conversion system based on H+-ion concentration cell stack

Highly conductive triple network hydrogel thermoelectrochemical cells with low-grade heat harvesting