Abstract:This study introduces a one-pot synthesis approach to fabricate MnCO 3 /electrochemically exfoliated graphene (EEG) hybrid material through an electrochemical synthesis route. Our approach involves the use of a sacrificial anode to induce electrochemical exfoliation of a graphite rod, while the electrolyte captures CO 2 from the air to utilize it in the synthesis of MnCO 3 through a simple and well-controlled route. The absence of any chemical carbon dioxide source in the solution stands as a significant advantage for MnCO 3 production. This approach promotes the creation of a synergistic MnCO 3 /EEG hybrid, capitalizing on the advantages of both materials. In addition, this method offers a scalable and cost-effective approach to fabricate MnCO 3 /EEG hybrid. MnCO 3 /EEG was characterized and analyzed utilizing a variety of techniques, including Fourier transform infrared spectroscopy (FTIR), Raman Spectroscopy, X-Ray Diffractometry (XRD), thermal gravimetric analysis (TGA) and scanning electron microscope/ electron dispersive spectroscopy (SEM/EDS). Electrochemical properties of MnCO 3 /EEG hybrid structure were studied in a three-electrode configuration by using cyclic voltammetry (CV), and galvanostatic charge–discharge (GCD) tests. The produced hybrid material has been successfully employed in asymmetric supercapacitors as the positive electrode to check its energy storage capabilities. In a three-electrode electrochemical cell, the MnCO 3 /EEG hybrid structure exhibited a specific capacitance of 90.5 F g −1 . Subsequently, when an asymmetric device was prepared and its performance was evaluated, it demonstrated a maximum energy density (E) of 15.7 Wh kg −1 and a power density (P) of 701 W kg −1 . The cycling stability remained above 85% after 3000 cycles. Furthermore, the hybrid material exhibiting the highest performance in supercapacitor studies has been evaluated as an anode material for lithium-ion batteries. In line with this objective, a lithium-ion battery cell was prepared, and similar electrochemical tests were conducted. The same material demonstrated a high specific capacity of 1382 mAh g −1 in lithium-ion battery half-cell applications. The results could be evidence that the innovative synthesis method is a prominent candidate to produce cost-effective and high-quality hybrid structures for energy storage devices. Furthermore, it is worth noting that the methodology employed in this study holds the potential for broader applications, extending beyond MnCO 3 and Mn x O y .

Transforming CO2 into energy storage solutions: MnCO3/electrochemically exfoliated graphene hybrid for supercapacitors and lithium-ion batteries

Mn0.5Co2.5O4 Nanofibers Intercalated into Graphene Frameworks with Mesoporous Structure for Batteries and Supercapacitors

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Graphene-Based Hybrids with Manganese Oxide Polymorphs as Tailored Interfaces for Electrochemical Energy Storage: Synthesis, Processing, and Properties

Single-Phase Mixed Transition Metal Carbonate Encapsulated by Graphene: Facile Synthesis and Improved Lithium Storage Properties

Nanostructured Manganese Dioxide for Hybrid Supercapacitor Electrodes

Formation of a CoMn-Layered Double Hydroxide/Graphite Supercapacitor by a Single Electrochemical Step

Biomass-derived porous carbon-incorporated MnO2 composites thin films for asymmetric supercapacitor: synthesis and electrochemical performance

In Situ Chemical Synthesis of Sandwich-Structured MnO2/graphene Nanoflowers and Their Supercapacitive Behavior

One-pot Synthesis of MnX2O4(X = Co, Ni)/graphite Nanoflakes Composites As High-Performance Supercapacitor Electrodes

Nanoarchitectured MnO2 Confined to Mesoporous Carbon Microspheres As Bifunctional Electrodes for High-Performance Supercapacitors and Lithium-Ion Capacitors

Simple synthesis and supercapacitor characterization of cobalt molybdate/graphene oxide nanopowders

One-pot electrochemical synthesis of ultrathin trimetallic Mn-Sn-Co oxide coral-like nanostructure as free-standing active electrode material for energy storage applications

Facile synthesis and electrochemical investigation of graphitic carbon nitride/manganese dioxide incorporated polypyrrole nanocomposite for high-performance energy storage applications

Ultra-High Energy Density Hybrid Supercapacitors Using MnO2/Reduced Graphene Oxide Hybrid Nanoscrolls

Highly Porous Nanocomposites of Mn Doped Cobalt-Based Hydroxide/sulfide As High-Performance Electrode Materials for Hybrid Supercapacitors

Cobalt based Metal Organic Framework/Graphene nanocomposite as high performance battery-type electrode materials for asymmetric Supercapacitors

A facile strategy for the synthesis of manganese-doped nickel sulfide nanosheets and oxygen, nitrogen-enriched 3D-graphene-like porous carbon for hybrid supercapacitor

One-Pot Rational Deposition of Coaxial Double-Layer MnO2/Ni(OH)2 Nanosheets on Carbon Nanofibers for High-Performance Supercapacitors

Facile fabrication of manganese telluride and graphene oxide nanostructure for robust energy storage systems

Constructing metal organic framework derived manganese cobalt layered double hydroxide nanosheets on Ni foam as cost-effective binder-free electrodes of high-performance supercapacitors