Methods for Pt-WO3/SBA-15 materials synthesis for glycerol conversion
Ana Luíza Freitas Ferreira,Kimberly Paim Abeyta,Jordan Gonzaga Andrade Batista Silva,Ronaldo Costa Santos,Luiz Antônio Magalhães Pontes
DOI: https://doi.org/10.1590/1517-7076-rmat-2022-0244
2023-01-01
Matéria (Rio de Janeiro)
Abstract:Glycerol has applications as a raw material in different industrial processes, however, its supply exceeds demand. An alternative to increase the added value of this feedstock is its conversion into high added-value chemical products through dehydration and hydrogenation reactions, from which 1,2-PDO and 1,3-PDO can be obtained. To develop catalysts that increase the conversion and selectivity of these processes, materials of 2% Pt and 10% WO3 supported on SBA-15 were studied. Two methods were used for incipient wetness impregnation: sequential impregnation, with impregnation steps for each species, and co-impregnation, with a single impregnation step for both species. From the analysis of XRD, XRF, N2 isotherms, SEM, EDS, FTIR, and pyridine FTIR spectroscopy, it was possible to observe the influence of these methods on the structural and textural properties. It was verified that the co-impregnation provided a better dispersion of the WO3 species on the surface of the SBA-15 and that the reduction process, for both methodologies employed, showed an improvement in the metallic dispersion. The better dispersion of WO3 species also resulted in a greater formation of Brønsted acid sites for the co-impregnation method, with a predominance of Lewis sites in the structure of the catalysts obtained by both methods.
materials science, multidisciplinary