Abstract:Purpose This study aims to solve the problem of high output voltage fluctuation and low efficiency caused by the misalignment of the magnetic coupling structure in the wireless charging system for electric vehicles. To address these issues, this paper proposes a dual LCC-S wireless power transfer (WPT) system based on the double-D double-layer quadrature (DDDQ) coil, which can realize the anti-misalignment constant voltage output of the system. Design/methodology/approach First, this paper establishes the equivalent circuit of a WPT system based on dual LCC-S compensation topology and analyzes its constant-voltage output characteristics and the relationship between system transmission efficiency and coupling coefficient. 1. Quadruple D (Ahmad et al., 2019) and double-D quadrature pad (DDQP) (Chen et al., 2019) coils have good anti-misalignment in the transverse and longitudinal directions, but the magnetic induction intensity in the center of the coils is weak, making it difficult for the receiving coil to effectively couple to the magnetic field energy. 2. Based on the double-D quadrature (DDQ) structure coil that can eliminate the mutual inductance between coupling coils and cross-coupling, Gong et al. (2022a) proposed a parameter optimized LCC-LC series-parallel hybrid topology circuit, which ensures that the output current fluctuation is controlled within 5% only when the system is misaligned within the 50% range along the X direction, achieving constant current output with anti-misalignment. The magnetic coupling structure's finite element simulation model is established to analyze the change in magnetic induction intensity and the system's anti-misalignment characteristics when the coil offsets along the x and y axes. Finally, an experimental prototype is developed to verify the constant voltage output performance and anti-misalignment performance of the system, and the proposed anti-misalignment system is compared with the systems in existing literature, highlighting the advantages of this design. Findings The experimental results show that the system can achieve a constant voltage output of 48V under a time-varying load, and the output voltage fluctuates within ±5% of the set value within the range of ±60 mm lateral misalignment and ±72 mm longitudinal misalignment. Originality/value Based on the dual LCC-S WPT system, the mutual inductance between the same side coils is reduced by adding decoupling coils, and the anti-misalignment characteristics and output power of the system are improved in a certain range. It is aimed at improving the stability of the system output and transmission efficiency.

Misalignment-tolerant Wireless Power Transfer System Based on Double-layer Quadrature Double-D Coil with Magnetic Field Control

Double Closed Loop Controller with Current Sharing of Interleaved DC/DC Converter for Dynamic Wireless Power Transfer System

A Dual-Source Inductive Power Transfer System Optimized with Large Misalignment Tolerance

Analysis and design of wireless power transfer system with anti-misalignment constant voltage output characteristics

A Compact Coupler with Integrated Multiple Decoupled Coils for Wireless Power Transfer System and Its Anti-misalignment Control

An Improved Design Method Based on a Multi-Plate Coupler Structure for Capacitive Power Transfer with Wide Ranges of Misalignment and Loads

Optimization of Multiple- Tx Magnetic Coupling Structure of Wireless Charging System Based on Orthogonal Method

Misalignment Tolerance and Interoperability of Wireless Charging System Based on Two-Channel Topology and Coil Optimization

Design and research of high misalignment tolerant magnetic couplers for dynamic wireless charging systems

Misalignment‐tolerant coupling cell of 2‐D modular WPT system for charging area simplified extension

A Misalignment Resilient System for Magnetically Coupled Resonant Wireless Power Transfer

Strong misalignment tolerance wireless power transfer with active adjustment of magnetic shielding

A New Hybrid Magnetic Coupler in Inductive Power Transfer System for High Misalignment Tolerance

High-Misalignment Tolerance Wireless Charging System for Constant Power Output Using Dual Transmission Channels With Magnetic Flux Controlled Inductors

Analysis and design for constant current/constant voltage multi‐coil wireless power transfer system with high EMF reduction

Enhancing Misalignment Tolerance in Hybrid Wireless Power Transfer System With Integrated Coupler via Frequency Tuning

Study on the Coil Position Adaptive Adjustment Control Scheme of Wireless Power Transfer System

Modified Coupler With Reduced Misalignment Issues for Wireless Power Transfer System

A reconfigurable bipolar coil for wireless charging systems with interoperability and misalignment tolerance characteristics

A Novel Coil Architecture for Interoperability and Tolerance to Misalignment in Electric Vehicle WPT

Improving Misalignment Tolerance for the Wireless Charging System Using Multiple Coils Coupler