A reconfigurable bipolar coil for wireless charging systems with interoperability and misalignment tolerance characteristics

Chao Liu,Mingzhu Zhou,Yizhan Zhuang,Yiming Zhang

DOI: https://doi.org/10.1063/9.0000674

IF: 1.697

2024-02-01

AIP Advances

Abstract:Wireless Power Transfer (WPT) technology has been developing rapidly in recent years. Electric Vehicles (EVs), as an emerging mode of transport, also benefit from the WPT technology. Various EV manufacturers have different coupling structures, which can lead to incompatibility problems between the coils. Meanwhile, due to the human parking, misalignment between the transmitting and receiving coils may occur. To solve these problems, this paper proposes a reconfigurable bipolar coil structure with both interoperability and misalignment tolerance. A 200-W experimental prototype is built, which can achieve 84.33% and 84.76% system transmission efficiency with vertical and horizontal bipolar coils. The effectiveness of the proposed reconfigurable bipolar coil is finally verified by comparing the computational and experimental results.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology

What problem does this paper attempt to address?

This paper attempts to solve two main problems in wireless charging systems: interoperability and alignment tolerance. Specifically:

1. **Interoperability problem**: Since different electric vehicle (EV) manufacturers may use different types of coupling structures, this leads to the problem of coil incompatibility between different manufacturers. For example, some manufacturers may use monopolar coils, while others may use vertical or horizontal bipolar coils. This incompatibility limits the universality between vehicles of different brands.

2. **Alignment tolerance problem**: In practical applications, due to the imprecision of parking positions, there may be an offset between the transmitting coil and the receiving coil, resulting in a reduction in transmission efficiency or even the inability to work properly. Therefore, it is necessary to design a coil structure that can tolerate a certain range of offsets.

To solve the above problems, the paper proposes a reconfigurable bipolar coil structure. This structure can not only switch between vertical and horizontal bipolar coils, thereby improving interoperability, but also tolerate alignment errors to a certain extent and maintain high transmission efficiency.

### Main contributions

- **Reconfigurable bipolar coil structure**: By changing the current direction, this structure can achieve the functions of vertical and horizontal bipolar coils, thereby adapting to different types of receiving coils.
- **Experimental verification**: A 200 - watt experimental prototype was built to verify the effectiveness of this structure. The experimental results show that whether it is a vertical or horizontal bipolar coil, the system transmission efficiency reaches 84.33% and 84.76% respectively.
- **Theoretical analysis and simulation**: Through theoretical analysis and simulation, the performance of this structure under different offset conditions was verified, proving its feasibility and reliability in practical applications.

### Conclusion

The reconfigurable bipolar coil structure proposed in the paper performs well in terms of interoperability and alignment tolerance, providing a new solution for the further development of wireless charging systems.