Abstract:Model Predictive Control (MPC) emerges as a promising solution to address the substantial greenhouse gas emissions from the building sector. By employing advanced control strategies, such as MPC, for peak energy shifting, there is a significant potential to enhance energy efficiency and reduce emissions through effective demand response within a smart grid. Although MPC has been the subject of extensive research, the practical implementation of cost-effective and easily deployable solutions in buildings remains limited. This study proposes a cost-effective MPC approach, employing the Internet of Things (IoT) and dynamic pricing. The control strategy, developed in MATLAB, is locally deployed on Raspberry Pi hardware via WiFi. The proposed MPC was tested in a controlled environment at the University of Nottingham, UK, where it regulated a radiator heating device to maintain indoor comfort in response to dynamic hourly electricity prices, using real-time indoor temperature feedback. The results confirmed the proposed MPC's accuracy in predicting indoor temperature responses and controlling indoor temperature within setpoints over a typical winter week. Performance analysis further revealed that the proposed MPC strategy resulted in a 20% electricity cost reduction compared to a conventional control strategy. Additionally, alongside the proposed MPC strategy, a Phase Change Material (PCM) wallboard system was integrated into a co-simulation platform. The developed PCM wallboard model underwent a verification and validation process, utilizing both numerical simulations and experimental data. The results demonstrate that the proposed MPC-controlled PCM wallboard system saved 35% on electricity cost compared with the original case study room. This study provides valuable insights into the development of intelligent localized demand response control for the built environment, offering a range of choices for IoT equipment.

A PLC-Embedded Implementation of a Modified Takagi–Sugeno–Kang-Based MPC to Control a Pressure Swing Adsorption Process

Get the design right, the rest is automatic: Towards an adaptive MPC controller

A Pragmatic Approach for Assessing the Economic Performance of Model Predictive Control Systems and Its Industrial Application

Experience-based Identification and Model Predictive Control for a Methanol Recovery Distillation Column

Progress in MPC Identification: A Case Study on Totally Closed-Loop Plant Test

A new adaptive MPC system

Development and Application of an Integrated MPC Technology

Model Predictive Control of a High‐Purity Internal Thermally Coupled Distillation Column

Toward a low cost and high performance MPC: The role of system identification

Adaptive Model Predictive Control Scheme for Partially Internal Thermally Coupled Air Separation Column

Model Predictive Control of a Solar Power System with Microturbine and Thermochemical Energy Storage

Advancing Control Paradigms in Heat-Integrated Distillation Columns: An MPC Perspective

On-line implementation of nonlinear MPC: an experimental case study

Data-Driven Model Identification and Efficient MPC Via Quasi-Linear Parameter Varying Representation for ORC Waste Heat Recovery System

Self-Evolving Offset-Free Model Predictive Control with Model-Plant Mismatch for Dynamic Working-Point Change Tasks in Industrial Processes

Model Predictive Control with Quality Requirements on Petroleum Production Platforms

Field experiment testing of a low-cost model predictive controller (MPC) for building heating systems and analysis of phase change material (PCM) integration

Real-Time Implementation of Improved State-Space MPC for Air Supply in a Coke Furnace

Towards model predictive control of supercritical CO2 cycles

Field demonstration and implementation analysis of model predictive control in an office HVAC system

Developing a novel Gaussian process model predictive controller to improve the energy efficiency and tracking accuracy of the pressure servo control system