Abstract:A modified ZSM-5 zeolite (denoted as ZSM-5-M), which was synthesized using tetrapropylammonium hydroxide (TPAOH) and cetyltrimethylammonium bromide (CTAB) as dual templates, and the commercial ZSM-5 zeolite (denoted as ZSM-5-C), have been used to prepare the corresponding CuZSM-5 (M & C) catalysts containing 3 wt% Cu by ion exchange method. Compared to CuZSM-5-C catalyst, the CuZSM-5-M catalyst demonstrated remarkably higher catalytic activity at low temperatures (<450 °C) for selective catalytic reduction of NOx with NH3 both in the simulated exhaust and engine bench testing. The modified synthesis by the dual template with the product aged for a long time at room temperature, leads to the formation of the ZSM-5-M zeolite with much higher specific surface area (608 m2 g−1) and higher total pore volume (0.8880 cm3 g−1) due to the presence of more mesoporous pores. The X-ray diffraction results showed that ZSM-5-M maintained its typical MFI structure, while its crystallinity (84.1%) was lower than that of the ZSM-5-C zeolite. The characterization results by H2 temperature-programmed reduction and X-ray photoelectron spectra revealed that the higher redox properties of isolated Cu2+ ions combined with the high-dispersion CuO crystallites and Cu+ ions are likely the main cause for the excellent low-temperature activity of the CuZSM-5-M catalysts. The isolated active Cu2+ species and high-dispersion CuO crystallites had a stronger interaction with other atoms in CuZSM-5-M catalysts. The results from thermogravimetric analysis, temperature-programmed desorption of ammonia and in situ diffuse reflectance infrared Fourier transform spectroscopy demonstrated that ZSM-5-M is a strong Bronsted acid site and the CuZSM-5-M catalyst had a relatively higher exchange rate of Cu2+ and Cu+ ions and more Lewis acidic sites, giving it a high NH3 adsorption capacity. The strong Bronsted acid site might be another cause that results in the higher NH3-SCR performance of the CuZSM-5-M catalyst.

Synthesis of CHA from MFI by three interzeolite transformation strategies and its application in NH3-SCR reaction

Efficient and rapid transformation of high silica CHA zeolite from FAU zeolite in the absence of water

Enhanced Synthetic Efficiency of CHA Zeolite Crystallized at Higher Temperatures

Synthesis‐structure‐catalysis relations in CHA zeolites applied for selective catalytic reduction of NOx with ammonia

Sustainable Preparation of Highly Efficient Copper Ferroaluminosilicate CHA Zeolite for Selective Catalytic Reduction of NOx with NH3

Importance of controllable Al sites in CHA framework by crystallization pathways for NH3-SCR reaction

Direct Synthesis of SSZ-13 Zeolite Using Tetraethylammonium Hydroxide As an Efficient Organic Template in the Presence of Conventional Aluminum and Silicon Sources

Direct Synthesis of High Silica Ssz-16 Zeolite with Extraordinarily Superior Performance in Nh3-Scr Reaction

Fabrication of Cu-CHA composites with enhanced NH3-SCR catalytic performances and hydrothermal stabilities

Enhanced hydrothermal stability of Cu-SSZ-13 by compositing with Cu-SAPO-34 in selective catalytic reduction of nitrogen oxides with ammonia

Enhancing nucleation to synthesize Al-rich CHA zeolites under ultra-low OSDA contents: Application for heavy-duty NH 3 -SCR of NOx

In-situ Interzeolite Transformation Synthesis Cu-SSZ-13 from Coal Fly Ash-derived Zeolite for NH3-SCR Reaction

In-situ interzeolite transformation synthesis Cu-SSZ-13 from coal fly ash-derived zeolite for NH 3 -SCR reaction

Synthesis of Hierarchical Chabazite Zeolite Via Interzeolite Transformation of Coke-containing Spent MFI

Cu-Exchanged CHA-Type Zeolite from Organic Template-Free Synthesis: an Effective Catalyst for NH3-SCR

Facile Synthesis of SSZ-16 Nanoaggregates with Excellent Performance in NH3-SCR Reaction

New CHA-Type aluminoborosilicates as efficient catalysts for MTO and NH3-SCR of NOx reactions

Potassium-directed sustainable synthesis of new high silica small-pore zeolite with KFI structure (ZJM-7) as an efficient catalyst for NH3-SCR reaction

Synthesis Of Ssz-13 Zeolite With High Molar Ratio Of Sio2 To Al2o3 By Crystal Transformation Method Using Tetraethyl Ammonium Hydroxide As Template

Synthesis and evaluation of mesopore structured ZSM-5 and a CuZSM-5 catalyst for NH3-SCR reaction: Studies of simulated exhaust and engine bench testing

Cu-SSZ-13 zeolite–metal oxide hybrid catalysts with enhanced SO2-tolerance in the NH3-SCR of NOx